Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a tripod for my SLR camera that I want to carry on my bike. It's just a generic tripod like this one, but if I strap it to my top tube it rubs against my legs while riding (and it's slightly too long for that).

I do have a pannier rack, but I haven't been able to attach it in a way I'm happy with yet. Do I have any other options?

share|improve this question
What kind of riding will you be doing? Does it have to be on the bike? – milesmeow Sep 16 '10 at 3:19
Mostly urban, with the occasional trip to the countryside. – Wilka Sep 16 '10 at 8:04

12 Answers 12

up vote 14 down vote accepted

Your best bet is to find a good way of attaching it to the rear rack. Anything attached to the main triangle much larger than a bottle is likely to cause interference with your legs.

One way you could attach it to the rear rack would be to buy some pannier hardware and make your own pannier for it. Or possibly attach the hardware (zip ties?) to one of the tripod's legs, making it into its own pannier?

The other option is to strap it down to the rack deck. A nice sturdy rack like the Surly ones should give you plenty of stability, using a couple bungees to tie it down. I've hauled 3 foot long loads on my rack this way without any trouble.

share|improve this answer
I agree it wants to go on the rear rack. I think that being able to carry it more or less vertical is proably the ideal (once upon a time you could, in the netherlands at least, buy a carrier for a McClaren style pushchair...) – Murph Sep 16 '10 at 7:29

stick it inside the pannier bag, protruding if needed. I've carried 4' long tubes of prints that way just fine.

share|improve this answer

This may not work, but it may not….

Can you can a section of plastic drain pipe. You can get screw on end and fixed ends for drain pipes.

Pipe Pipe End Clip


  • Fix the drain pipe to the top of your rack and use a screw on end to keep the Tripod in.
  • Or fit the drain pipe to the back strays and have the Tripod standing partly above your rack.

Jubilee clips may be useful for fixing on the drain pipe maybe comfined with Pannier Mounting Hardware.

share|improve this answer

A longish trunk bag should do the trick. It'll stick out the end, but at least it won't unbalance the bike too much -- and you'll have room for other camera stuff in the bag.

share|improve this answer

Just strap it to the top of your rear pannier rack. Bungee cords are probably the best, but you can use compression straps or whatever you tried lashing it to the top tube with.

Orient the tripod so that the swivel head is at the very front of the rack, with the feet sticking off the back. The head is the heaviest part -- the closer it is to your body on the bike, the less you'll notice it. My guess is that you'll almost forget it's back there!

share|improve this answer

The way I manage it is with a pannier which has a spring clip. I just stick it under there, parallel to the frame of the bike, & it stays there quite well. Both my larger tripod & smaller ones fit there fine! Though if you're going out at night, make sure that they don't obstruct any lights you have on your bike.

share|improve this answer

I just leave a milk crate attached to the top of my rear rack via bungee cords. Anything too big to fit all the way inside (such as a camera tripod) can be secured with more bungee cords over the top.

share|improve this answer

I use a sling like shoulder strap and bag. I dont mind the bag, it has some padding and room for extra tools / supplies. I have tried hooking a strap to the tripod itself (at the head and the weight hook, but it felt more unsecured than just using the bag.

share|improve this answer

Try out this website, it apapts to your pannier rack via the Ortlieb bag system, which means just adjust this tripod bag in a very simple way to your pannier rack (it fits to all) within a minute and then safely fix the bag within 3 seconds and take it off by just grabbing it on its handle. g Genious! Unfortunately the website is in German only. Write in English, usually Germans understand English quite well. Good luck Roy

share|improve this answer

Attach it to the rear rack with bungee cords and make sure it is orthogonal to the bike. This way, cars will be more careful.

share|improve this answer
I disagree. If it sticks out the side (i.e. orthogonal to the bike) it will make cars more likely to hit you when they are not careful. Nothing seems to make bad car drivers more careful. – Wayne Johnston Sep 26 '10 at 20:45
You'd also have to be more careful yourself to avoid hitting pedestrians or other cyclists with your cargo. – Imre May 16 '12 at 4:18

I either strap it across my back rifle-style or strap it across my camera bag (I use a Mountainsmith hiking pack like this to carry my SLR when I'm biking). I've found I can control it a lot better than if it's sticking out either behind be or to either side. You can buy shoulder straps for your tripod (that incidentally ensure that it doesn't open as you're hurtling down the road) or just make one from a length of tubular webbing.

share|improve this answer

I've used a tramping pack for carrying large things, like a tool case the size of a large briefcase. As long as its not too high behind your head its a workable solution.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.