Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I was watching the BMX racing on the olympics and the gearing seems incredibly low. About half way down the start ramp they are already going too fast to keep pedalling and they barely seem to be able to pedal effectively any other time through the race.

Why don't they adjust the gearing to be higher so they can get more power down through the course?

share|improve this question
Did you mean "so low"? Your description suggests that the gearing is actually too low. Yet for some reason you keep saying "too high", until in the last sentence you suddenly suggest that it should be adjusted even higher. (???) – AnT Aug 10 '12 at 6:25
The UCI rules say "Multiple speed gear systems are permitted", so I'm surprised nobody seems to be using one -… – Tom77 Aug 10 '12 at 9:06
I loved the BMX in the olympics. As it goes, looks like soon they will abolish saddles, too, since they seem to only touch them before landing on their faces after a bad reception :oP (ouch!) – heltonbiker Aug 10 '12 at 17:50
The problems with multi-gear far out weigh the advantage, not enough straight and too much torque. As for the seats, it is a safety issue so you don't get skewered in a crash on the seat post. Most seats are nothing more than a seatpost cap. – BillyNair Aug 10 '12 at 18:37
up vote 14 down vote accepted

The tracks do not have many long stretches and so cornering and getting ahead of the pack is a lot more important than going fast in the flats. The gearing on a race BMX is higher than on one you will buy out of the store. Most BMX will come with 44:16 gear ratio where racers will use 46-48:16, and I have seen higher. (There are different rear sizes but the standard is 16 when talking about Gear Ratios, even if you ride 9t or 14t rear you almost always know the conversion to 16t.)

Most racers will start with 44/45:16 then move up when they build their leg muscles to handle the higher ratios, but even then you really need that hole-shot a lot more than you need the higher end speed.

If the tracks had longer straights like a mountain bike course you might see more bikes with multiple gears and even higher gearing. As it stands, the berms are where you make your moves and getting in and out of the berms require more power than raw speed. I raced 44:16 against guys with 46:16 and never placed lower than 3rd. You want more power than over all speed on a race track.

On street or in park you want even lower gearing, especially when you are trying to get that last pop before jumping up onto a rail.

share|improve this answer

This is all my guessing based on BMX racing when I was younger, but getting ahead of the pack out of the starting gate is a rather big deal. Once you're behind or right next to someone else, you sometimes have to tap the brakes to avoid them, so there's a huge advantage to this sudden rush of acceleration.

This would be a clue as to at least an upper limit on gearing. You might have some advantage to higher gearing after the starting gate, but you wouldn't have the quick burst and you'd probably spend much of the race making up for it.

Much of the gear selection from at least stock BMX bikes has to do with age; I remember having a lot of difficulty with how high mine was geared because of my age. This would be why some youth-oriented BMX bikes have low gearing, although this doesn't apply at all to professional circuits.

share|improve this answer
It's exactly because of the acceleration. BMX courses put a premium on being the first to the turn so the start is critical. Recently, UCI rules governing BMX have been amended to allow gearing systems but BMX riders have eschewed them, in part because they put out a max instantaneous power in excess of 2000 watts and few bicycle gearing systems can take that much load without risking a missed shift. – R. Chung Aug 10 '12 at 11:12

It is because BMX racing is sprint racing. The riders stand and spin very quickly. There are a variety of crank lengths available which can help achieve higher cadences (RPM) based on your skill and leg length, and which in turn affect gear choice.

share|improve this answer

I think its fine I have no problem keeping up or beating mountain bikes in racing but I have 46-16 Gearing Ive seen bmx's with tiny gears like aprox 27-12 those might be slow I pick up 24 mph in mine in flats (sprints) I use street car speedometers

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.