Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Such as Shimano acera, deore; or SRAM X5, X4 etc... I'm thinking of adding this http://cyclingabout.com/index.php/2011/12/use-barend-or-downtube-shifters-for-bike-touring/ (handlebar and whatever is in it) in my MTB and change shifters and brakes if needed. But I would like to know if those would work with the back and front dereailleur I have already installed. I gave some examples cause I'm yet to buy the MTB with one of those derailleurs :)

share|improve this question
    
If you could edit the body of your question to clarify what it is you are hoping to achieve/any options you are considering, it'd make it more informative and direct. –  WTHarper Aug 31 '12 at 3:31
add comment

1 Answer 1

up vote 1 down vote accepted

Most Shimano components are compatible with the Ultrega and Dura Ace bar end shifters, so long as they are specifically for 8 speed or 9 speed systems (you can use a 9 speed shifter on a 7 or 8 speed cassette, but not the other way around). If you're fussy about indexing, it may take some adjustment, but friction shifting is fast, reliable, and cheap! (If I remember correctly Ultrega and some of the Dura Aces have a friction option, while a few Dura Ace models have only indexing). You will run into issues with 10 speed Shimano bar end shifters, especially with the front derailleurs. (Make sure that the shifter is compatible with triple cranks if you have a triple.)

Sram mountain derailleurs, however, DO NOT work with most bar end shifters! I've never actually tried it, but I've read in numerous places that they are not compatible (even with Sram bar end shifters).

Additionally, there are numerous other manufacturers of bar end shifters (Rivendell Silver Shifters, for one). Many different mounting options exist, including Paul Thumbies, which allow shifter levers to be mounted on top of the bar, as well as a bracket by IRD for mounting to the stem.

Here, again, be aware that road handlebars have a larger ID than mountain handlebars. A bar end shifter made for road bars will not fit inside of a mountain-specific bar.

share|improve this answer
    
Yes, my initial option was to try to use the MTB shifters on the road dropped handlebar, but the diameter is different, so I had to think about changing the shifters and that's why I made this question :) Thank you! –  bsiq Aug 31 '12 at 12:16
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.