Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have older Campagnolo Chorus 10-speed shifters. They are marked 'Carbon BB System'.

I am replacing my front derailleur and have a spare 10-speed Record QS front derailleur. QS stands for Quick Shift. I understand that the QS system changes the ratio that operates the derailleur.

Will an older non-QS lever work with a QS front derailleur?

share|improve this question
add comment

1 Answer

up vote 3 down vote accepted

In short the answer is Yes.

From the installation & maintenance manual

The new QS Ergopower controls provide for fast operation and a lower shifting force if used with the new QS front derailleurs.

The QS Ergopower controls and the QS front derailleurs can also be used with non-QS Ergopower controls and front derailleurs. However in this case please note that:

  • QS Ergopower controls with non-QS front derailleurs could require a higher force to effect shifting.
  • Non-QS Ergopower controls with QS front derailleurs will require at least two lever movements to effect shifting.
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.