Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I noticed that the handle post hinge on my Dahon Speed D7 now requires attention much more often than it used before. Unlike main frame hinge which remains tight for long after adjustment, this one now requires tightening at least once week, otherwise handle post becomes shaky.

Red arrow on the image below shows the 10mm nut I have to tighten to move that metal "foot" above a bit closer to the edge to the to secure the handle post when bike is unfolded.

Hinge close-up

(don't know if I managed to explain the process clearly enough, but Dahon bike owners should get the idea, I believe)

This is an old bike, but until last 4 or 5 months I only had to tighten that nut once a month or even less often. Now it's much worse and getting worse with time.

I have marked one of nut's sides to determine if the metal "foot" started to wear out quickly or the nut is somehow loosened moving down the screw. Turned out it is, something forces the nut to rotate at 60 deg or so every week, so I'm not actually tightening it but returning it where it belongs.

To be honest I don't understand the mechanics of this process (what makes it to unscrew) and wonder if this is something I can fix or I'll need a new handle post soon.


share|improve this question
Thanks for the question. I also had the same problem in 2 Dahons I had: Curve D3 and Glide and I have been searching for an answer for a while. – David Sep 27 '13 at 8:08
up vote 4 down vote accepted

As with any critical fastener on a bike, the vibration and flexing forces from riding will eventually work threaded parts loose. Normally this is the sort of thing that occurs over a few months--not every week. Fortunately, there are a few options that are applicable to this and any other situation where threads work themselves loose. (Before you do anything, though, make sure that the rest of your steering components are safely adjusted.)

The easiest thing would be to buy a tube of Loctite (or comparable) thread locking compound. It is cheap and easy to find. You'll want to get a formula that isn't permanent so that you can make adjustments down the road. Back the nut off until you see some threads and add one or two drops those threads. Adjust the tension where it needs to be and let it sit for a little while. (Loctite is safe for threads mostly everywhere on a bike!) In less critical applications, beeswax is a great natural compound for securing threads and preventing corrosion.

A second option would be to replace your 10mm nut with a lock nut. These are nuts with a nylon (or similar) insert in the aft part of the threads which prevents it from working loose. Similarly, you could procure a lock washer which will prevent the nut from backing out when tightened properly. (It doesn't look like you have enough space for it, but a second nut behind your primary nut (called a jam nut) will keep the adjustment stable as well. Jam nuts are typically narrower than a standard nut so they use less threaded area.) Any well-stocked hardware store will have suitable metric hardware.

If those options fail you, you may need to take more permanent action. Either chemically (with a permanent thread locking solution), or mechanically by installing a castle nut. A castle nut has notches along one side to mesh with wire or a cotter pin that is drilled through the threaded bolt. The wire prevents the nut from backing off, but the downside is that this requires drilling a tiny hole straight through the bolt (which would require you use a drill press and lots of diligence). I really don't think you'll have to resort to this last option, but it works.

In any case, continue to be vigilant in inspecting those parts for wear and adjustment.

share|improve this answer
Please be cautious when making any modifications. If you do anything that could cause the handlebar post to fail while riding, you're gonna have a bad time. – Neil Fein Oct 17 '12 at 23:55

hi I think I found a solution to the problem. my handlepost on my MUXL would get loose after 2 commutes so what I did was I unscrewed the two bolts halfway that fix up to the stem and put loctitie on the threads and tightened them up and then loosened them an eight or a quarter (cant have them tight or you wont be able to open the latch) then I tightened the screw beside the little white block a half turn and tried the latch if still loose turn another bit and try until right. Sometimes that does the trick. Mine became progressively loose and wouldn't stay tight so in the gap I filed down a washer to that size and cut it in half so it would fit in. I dipped a little super glue before placing it in and so far has worked!!!

share|improve this answer
Gidday and welcome to SE Bicycles - Good answer, thank you. – Criggie Jan 14 at 19:19

that tension adjuster bolt .... red loctite works wonders, and while you're at it, check the plastic block. If it has worn or has cracks it needs to be replaced. Don't tighten the two parallel big bolts in the slots, the bracket needs to be able to move ... A good cleaning won't hurt either :-)

share|improve this answer

protected by Community Jan 29 at 22:29

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.