Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I see these everywhere, but no one can come up with a consistent name for them from company to company. GXP is the closest I can come to a name for the bottom bracket.

http://www.sram.com/sram/road/products/sram-apex-crankset#/path/term-id/254

share|improve this question
    
Are you referring to the type of bottom bracket that it is? An external thread-in? –  hillsons Oct 19 '12 at 19:16
    
Kind of. So Shamino calls them Outboard bottom brackets. I was wondering if there was a standard name across the industry. Kind of like the square tapered bottom bracket is always the same. –  Chris Belsole Oct 19 '12 at 19:18
add comment

2 Answers

up vote 5 down vote accepted

Sram apex is a double chainring crankset which uses a GXP (aka Giga-X-Pipe) bottom bracket which is an external bearing bottom bracket.

I think External Bearing or Outboard bottom bracket are both commonly accepted terms, however there are several different incompatible types of external bottom brackets such as hollowtech, GXP, and Ultra Tourque.

share|improve this answer
add comment

The correct terminology is "GXP" or "GXP compatible crank set", for your SRAM Apex.

An outboard BB includes any BB which uses the same BSA or Italian threading as older style BB's, but places a larger bearing outside the frame, rather than a s,Allen bearing inside the frame. This increases BB stiffness and durability, while reducing weight. Unfortunately, unlike square taper BB's, there are many varieties of out board bearing BB's and they are not interchangeable.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.