Tell me more ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.
up vote 2 down vote favorite

I have a SRAM force compact crankset and I want to change it to a standard 53-39. Is it possible and how do I do it?

share|improve this question

1 Answer

up vote 2 down vote

Yes, it is possible and fairly easy. You'll need to purchase a new chain in either route you go. You will also need to move and readjust your front derailleur.

You can purchase a new standard crankset and swap it out. You'll need to ensure that you get the correct version to match the bottom bracket which is most likely either BB30 or GXP and should be detailed on either your frame documentation on the frame itself or the bottom bracket.

If you do not have experience with this, you might want to bring it to a shop to actually switch out your cranks if you go that route to ensure proper installation.

share|improve this answer
1  
New chain rings 39/53 will not fit on a compact crank arm as the dcb is larger. You will have to buy a new chain set to fit your existing BB and increase the chain length with the excess chain from the one fitted. – Kipper Nov 3 '12 at 23:02
@Kipper, after about 5 minutes of searching, I've found rings by TA Specialties for 110 bcd that are compatible with 10 speed setups: harriscyclery.net/product-list/parts-1400/chainrings-1405/… – Tha Riddla Nov 4 '12 at 12:40

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.