Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I'm putting a bike together from a load of spares and I'm having difficulty getting a shifter and derailleer to play well. I think the problem is the Zee mech. Does anyone know the pitch/pull ratio in MM of the XT shifter compared to the Zee shifter? Ideally an answer 'from the horses mouth' would be good as I've read all sorts of conflicting info.

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Shimano’s Dyna-Sys (10 speed MTB) products are only compatible with components in the Dyna-Sys lineup, from XTR to SLX. They are not compatible with any other parts. Use of a Dyna-Sys derailleur with 9-speed shifters is contraindicated.

share|improve this answer
    
Thanks zenbike. Any info on the actuall pull lengths/ratios? I know that some have managed to get SRAM stuff working and I'm trying to get a technical answer instead of a 'product blurb' answer that I keep seeing on the Shimano site and other reviews. –  Mere Development Dec 7 '12 at 14:49
    
The ratios haven't been published for Dynasys. But it isn't just the ratio that prevents proper shifting. It is also the travel path of the derailleur, which sits too far away from the cassette compared to a 9 speed derailleur. I've spent hours trying to make this work. It just doesn't. –  zenbike Dec 9 '12 at 3:21
    
Ok thanks mate! –  Mere Development Dec 9 '12 at 19:28

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.