Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I've got an FSA Gossamer pro MegaExo compact crank set. Lately, while tightening the bolts on the crank spider, it cracked (see picture). I know FSA has recalled the left crank because it turned out to crack for the same reason. Has anyone had the same problem with his right crank? Does FSA sell spare parts?

spider crack

share|improve this question
1  
Left crank does not have a spider to crack - how can it be "recalled for the same reason". Suggest you take the part back to the place of purchase and discuss with them. FSA is a reputable brand, I expect they would replace a faulty part. –  mattnz Dec 13 '12 at 2:09
    
Yes, but it has mounting holes as well. This is from the recall notice "Full Speed Ahead (FSA) has received reports that the bolt shoulder on the non-drive Gossamer BB30 series crankarms can crack and break if the installer exceeds the recommended torque specification while tightening the crankbolt." –  artistoex Dec 13 '12 at 9:38
    
Thanks for down-voting btw –  artistoex Dec 13 '12 at 9:39
    
-1 Because the question is more of a rant than a valid question. –  mattnz Dec 13 '12 at 20:49
1  
I did not mean to rant. I'm very happy with all the FSA components. They perform extraordinarily well in terms of transmission efficiency and directness. Just wondered whether the crack was related to the recall notice. –  artistoex Dec 14 '12 at 9:11
show 1 more comment

2 Answers

Windwave Distribution are the UK returns contact for FSA, among others. You could give them a call, i'm sure they could help: http://www.windwave.co.uk/index.html

share|improve this answer
add comment

You're better off getting on the phone to FSA as opposed to asking your questions here. If it's a common problem they'll be the ones to know and they'll likely be eager to set it right.

I can tell you that I've had no such problems with my Gossamer cranks in many years of ownership. If I were to speculate I would say that that is a defect and if the cranks aren't ancient (which they don't appear to be given your BB style) the manufacturer may well cover it.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.