Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have cranks with 4 holes for outer and middle rings attachment. There are no holed for inner ring attachment. On my other bikes crankset middlering has 8 holes 4 for cranks and 4 for inner ring. I tried to take them and attach to my other outer chainring and cranks and put it on bike, everything works perfect. The problem is I can't find middle chainring with 8 holes for sale in my country or on ebay. Should I drill 4 more holes on my crank. Or what should I do please advise!

Some IMGS:

I. My other middle chainring with 8 holes, I can't find it for sale:

http://i.stack.imgur.com/EsnRM.jpg

II. My crank inner side with 4 places for drilling maybe :D

http://i.stack.imgur.com/gWSiX.jpg

share|improve this question
1  
What brand cranks are you swapping parts from. –  mikes Dec 19 '12 at 2:39
    
Wow I've never seen an inner attached to a middle like that. It does look like the 4 posts/blanks in the spider are exactly where you would usually find inner ring holes. As Mikes says, we need to know the chain set brand (or bike brand) –  Mere Development Dec 19 '12 at 8:23

1 Answer 1

I dont remember how did I connected here yesterday, so now I writing connected with gmail with my phone. Anyways, I took 32T attached to 22T from XCT SR SUNTOUR V3 22t,32t,42t crankset, I bought it from ebay, sorry cant give you the link now. Cranks with 4 holes only are FSA alphadrive. XCT also has 4 holes only on crank.

EDIT: cranks with middle chainring which has 8 holes.: http://www.ebay.co.uk/itm/280915668543?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.