Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I am looking to buy a bicycle for a San Francisco city commute totalling 4.1 miles (about 6.6km) in each direction.

My question is, what handlebar position (and riding position) would be recommended for such a ride?

I notice drop bars are very popular here, but I am concerned that the bent over position would be stressful given that I will be commuting 5 days per week. At the same time, I do not want to overly stress my quads. Perhaps a compromise is recommended?

share|improve this question
1  
I think drop bars are popular in SF mostly because they were popular 20-30 years ago and there's a lot of using fixed up older bikes as commuters in SF. –  freiheit Dec 28 '12 at 20:12
    
Is that 4.1 flat miles, or is it hilly? –  freiheit Dec 28 '12 at 20:15
5  
@freheit uphill both ways in snow –  ekaj Dec 29 '12 at 2:05

3 Answers 3

up vote 1 down vote accepted

I believe I'd opt for the drop bars. They give you several different positions; on the drops, on the brake hoods and on the top of the bars. The top of the bars position is fairly close to and upright position like you'd see with regular handlebars. I immediately thought of the hills and winds you can run into in San Francisco! There may be times when a more aerodynamic position would be your best choice for efficiency. Once you get your bicycle set up correctly...seat height and position forward or aft and tilt angle, and the handlebar height, any position you use with drops should be fairly comfortable for your short commute. If you haven't purchased a bike yet, perhaps the local bike shop will allow you a test ride using different handlebars available on bikes they have at the shop. I've even seen the drop bars used upside down for a totally different look and fit.

share|improve this answer
    
I second that recommendation - when I had a 3 mile commute in SF, I had drop bars on my bike, but installed cross levers so I could still use the brakes from the top bar. Now I have a 12 mile commute and really appreciate the drop bars for the additional hand positions, and the more aerodynamic tuck on the rare windy days. –  Johnny Dec 31 '12 at 2:45

I love a good drop bar, but if you're only going 4 miles, an upright position might be more comfortable for you, especially if you're starting to commute for the first time.

Start with your basic commuter bike if you want, something that looks like this, with some flat handle bars. http://s7d4.scene7.com/is/image/TrekBicycleProducts/52049

Head to a bike shop where you can test drive some different models, maybe you even end up liking the drop bars more. Especially if you have some hills in your way on your commute.

share|improve this answer
1  
And let's face it, most of the time you ride on a bike with drops, you're not actually using them. Certainly for me, my hands are mostly on the shifters. –  PeteH Dec 28 '12 at 22:22
    
I'd go for a bike with drops. You can always spend most of the time on the hoods or tops, which isn't much different from a flat bar. The drops are there for when you need them. Plus a nice drop bar offers many different hand positions, which can help to relieve fatigue. Even if you're only travelling 4 miles, changing hand positions can help. If you have some small injury on your hands (even not bike related injuries) having different positions you can place your hands can help make riding more comfortable. If you want a more upright position, try a touring bike over a racing bike. –  Kibbee Dec 29 '12 at 0:41
    
I would drop the suspension. Extra weight to carry up hills with very little utility on a city bike. –  sixtyfootersdude Jan 11 '13 at 16:44

For a short commute in street clothes I opted for flat bars with bar end extentions. This allows some different hand positions and for me a more comfortable upright position. If you are riding for the first time is several years, bike fit is more critical than bar type. A bike that is the wrong size will never be comfortable no matter what type bar it has.

share|improve this answer
    
I discourage extensions as they are known to cause horrendous internal injuries in accidents. "Large series of patients with liver haematomata sustained during mountain-biking crashes have been reported.34 All of these patients had blunt focal blows to the right side of the abdomen due to the handlebars, and all were using ‘bar ends’ on their handle bars." .... Ref: bmb.oxfordjournals.org/content/85/1/101.full –  mattnz Dec 30 '12 at 7:19
    
in that respect wouldn't the hoods of a racing bike cause the same problems? geometry must be similar. –  robthewolf Dec 30 '12 at 8:27
1  
Quite different. Hoods stick up less and have more area (brake handles), so do not cause the same degree of localised presure Bar ends do, –  mattnz Dec 30 '12 at 22:26
    
Crashes while mountain biking are quite different than commuting crashes. I wouldn't worry about the potential of damage with bar ends in a commute - a car is a much bigger problem. –  Batman Feb 25 at 2:32

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.