Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Is it possible to change the braking system from rim brakes to rotary. I want to replace them because I hate how after a while the pads wear out and I need to replace it so I think the rotary might be better. What would I need to do?

share|improve this question
1  
What kind of brakes does your bike have now? A picture and description would help a lot. Do you mean that you have some type of rim brakes (pads grab the wheel near the tire) and you're thinking about changing the bike to disc brakes (pads grab a rotor/disc near the center of the wheel)? Do you mean drum/roller/coaster brakes (brake inside the hub of the wheel)? –  freiheit Dec 31 '12 at 0:20
    
Yes, I have rim brakes. I've never heard of drum/roller/coaster brakes but anything better and the cheaper of the 2. –  Supremekhaoz Dec 31 '12 at 0:23
    
You must realise that all brakes work by friction, so to stop the brakes themselves being destroyed, have a 'sacrificial' layer for a braking surface. This means all brakes have pads that need changing. –  cmannett85 Dec 31 '12 at 10:44
add comment

2 Answers 2

up vote 6 down vote accepted

In general, you can't replace rim brakes with hub or disk brakes unless the frame is designed for that. In particular, hub or rim brakes place too much stress on the front fork unless the fork is designed for them. You're probably better off buying a new bike with the "right" (for you) brakes factory-installed.

But I'm surprised that you have so much trouble with rim brakes. I just had my rim brake pads replaced for the first time last year, after putting about 10,000 miles on my current bike.

share|improve this answer
1  
From experience, off road MTB in volcanic country the pads won't last more than a few 100km, but neither does the bike...... Sandy trails is another killer. –  mattnz Dec 31 '12 at 2:03
    
They aren't that bad I guess I just have to get better brakes. –  Supremekhaoz Dec 31 '12 at 11:54
add comment

The most practical solution would be to upgrade your brake pads. They may seem expensive, but both Koolstop and SwissStop work pretty good. Search around, there are many online sellers.

You can see a significant change in brake performance with the right pads installed.

share|improve this answer
    
Very good idea I think i'll just get better brakes. –  Supremekhaoz Dec 31 '12 at 11:55
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.