Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I asked an earlier question regarding putting modern road wheels on my old steel frame.

After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm considering takes an 8/9 speed and has a Shimano fitting). My bicycle is currently a 7-speed and uses a freewheel rather than a freehub.

So I think I have 2 options:

  1. Put an 8-speed cassette on the new wheel and increase the number of gears on my bike. Issues: I assume an 8-speed uses a narrower chain; will my front chainring work with it?
  2. Put on this 7-speed cassette which says it can work on an 8/9-speed hub with a set of spacer rings. Questions: how do I use the spacer rings? Do I need only one of each for the whole cassette of one for each sprocket? Will this allow the slightly wider chain I currently use on the 7-speed.

Which option would be the better choice?

A few points to consider:

  • Shifters are friction, so no need to consider indexing but I am unsure whether they have the range for an 8-speed (but with a narrower chain maybe the range is the same, just with smaller movements between gears)
  • My deraileur is actually a modern Shimano 8/9 speed already (as the old one broke). I have adjusted it to suit my 7-speed with the limiter screws.
share|improve this question
add comment

2 Answers

up vote 3 down vote accepted

Since you have friction shifters and an 8/9 speed derailleur, you should be able to pop a 9 speed cassette on the back and use the full range. You'll have to re-adjust your limit screws of course. Worst case, if that doesn't work, you may be able to remove one of the small cogs and space it out to use only 8 speeds.

The font chainrings will also likely be fine, usually you can go up/down one size without issue for front chainrings. Since your front chainring is designed for 8-speed, it will probably work fine with a 9-speed chain. I regularly use a 9-speed chainring in front with an otherwise all 10-speed setup without issues.

share|improve this answer
    
Great, think I'll opt for the 8-speed as I'm currently on a 7 and only going up one size is probably safer. Besides I don't feel the need for more than 8 on the back. –  harryg Jan 17 '13 at 21:24
add comment

I also use friction shifters, and recently put a 10 speed cassette onto my freehub - previously I had a seven. I put a 10 speed chain on as the chain walls are narrower. I have not yet changed the front chainrings, which are "eight speed".

In your case put on a chain to match your cassette. Seven speed cassettes usually have a spacer on the wheel side when used on a larger freehub.

It's always advisable to change the chain when you change the cassette anyway.

share|improve this answer
    
I intend to change the chain anyway. So I assume you have no problem with the narrower chain getting stuck between your front chainrings. –  harryg Jan 17 '13 at 16:43
    
No problems at all with the set up - apart from the cost ... –  DanS Jan 18 '13 at 10:56
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.