Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Just asking if it is possible. My friend added gears, but won't it damage the look or my cycle?

share|improve this question
    
I found a good write-up from somebody who actually did this, including a front derailleur (which was later removed) faqload.com/faqs/bicycle-components/drivetrain/… – Kibbee Jan 22 '13 at 21:13
    
who down voted this? - its a perfectly good question. – Mark W Jan 23 '13 at 11:45
    
Alyan - its three years later. Are you able to tell us what you did... did you add gears to your BMX? If so, how did it go, were there any significant roadblocks, and how did you resolve them? – Criggie Feb 16 at 10:31

It is possible. There are a lot of 20in wheel bikes with gears. There are some problems, though:

  1. The frame might need to be opened so that the larger hub can be inserted;
  2. There are no derailer hanger in bmx frames, so you'll have to use an adaptor, or a simpler derailer model which is mounted together with the axle;
  3. The derailer itself is closer to the ground compared to 26in wheel bikes, but this might not be important, since many folding bikes are that way.

The least of your problems would be "looks"...

OR...

You can throw some more dollars and install an INTERNALLY GEARED HUB, which not just wouldn't break the clean looks, but would actually benefit from the horizontal dropouts found in BMX frames. But those are usually quite expensive.

share|improve this answer
1  
And the geared hubs are probably still a bit fragile for true BMX use. Plus the geared hubs are quite large, and the spoke length would be quite short (leading to various problems) on a 20" wheel. – Daniel R Hicks Jan 22 '13 at 18:00
    
Many years ago, I used to have derailier mechs that fitted on the axle with a lug that engaged the frame to stop it being pulled forward by the chain. Maybe those are still around? That might need a longer axle. – DanS Jan 23 '13 at 10:07
    
a 2 or 3 speed hub is not much bigger than many BMX hubs, and only 2 or 3 times the weight. They're surprisingly robust, but the shifter mechanism poking out the side is fragile. – Móż Feb 16 at 11:04

protected by Gary.Ray Feb 16 at 3:32

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.