Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Iv'e got some Tektro RL726 brake levers that I want to fit to a project bike. I bought the cables online & they have arrived with a stopper on both ends. Am I right in thinking I have to cut one end off so I can thread it all through the brake, lever & housing?

If I have to cut the cable, which end do i keep for that lever type? The bigger drum bit or the more torpedo like narrower stopper (which looks like it would fit in the housing of the lever a bit.

share|improve this question
add comment

1 Answer 1

up vote 4 down vote accepted

Yes, you have to cut off the stopper you don't need.

In your case, cut the non-torpedo end. Take a look at the picture here: http://www.tektro.com/_english/01_products/01_prodetail.php?pid=58&sortname=Lever&sort=1&fid=3

Under "Specifications", "Brake Cable Type" it has a picture of the end you need to leave attached.

Happy Riding!

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.