Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have not bought one yet, and i am very new to the sport. The type of riding I will be doing is dirt jumps(rather large ones), and rugged trail riding. I used a BMX for these things previously, which actually worked out pretty well... As a newbie to the sport, I am just wondering which type of rear shock would be best to look for: Hydraulic, or spring?

I want something that is gonna be easiest to maintain, and most efficient while riding. A bike i have been looking at is the "Scott" Voltage FR 30/20/10 models (these all have a spring rear shock) or a "Trek" Slash 9/8/7 model (which have a hydraulic type shock). I am leaning towards the "Scott" Voltage bikes... They look simpler... But I am unsure.

share|improve this question

3 Answers 3

First step: clear the confusion. As other answer states, the spring and the damper are complementary systems that work together in order to provide the desired ride characteristics. As for bike suspenssion regards, there are two main kinds of suspension components, based on the type of spring: Coil and Air. Most suspensions have hydraulic dampers regardless of the spring type.

Second step: To each its own. Asking wether air or coil is beter can get you in those kind of almost religious debate. Instead, I'll try to expose a few points of comparison so you can make a better decision:

Air Spring:

  • Weight less than coils.
  • Are easily adjustable to a broader range of rider weight/activity type/ride skill or technique.
  • Have a cleaner, simpler look.
  • Most of them require a special pump to increase the spring preload (reduce sag).

Coil Spring:

  • Usually have a lower cost.
  • Are heavier than air springs.
  • Most can have the preload/sag adjusted by hand.
  • Have a narowwer range of adjustment, to make further adjustment the coil has to be replaced by a different one, wich may not be easily obtainable in your particular location or may not be available from the manufacturer.
  • Have a messier look and require a little more dedication for routine cleaning.

Further up, it is more important wether the shok absorber is the correct fit for the bike frame and the discipline in wich it will be used. For example, a shock designed exclusively for XC may never excel on DH for a normal wheigted rider. If you are buying a complete bike directly from the manufacturer or a reputable dealer, they should only offer the correct shocks for the frame, so it's up to you to choose a bike that fit your intended use. Also if the same bike is available with different shock options, make sure the one you pick is suitable for your riding.

Finally, getting the right equipment is only the beginning of a customizing process. If you are changin the type of bike, you will have to go throug a fitting and fine tuning cycle that will be somewhat affected by your own ability to adapt to a new geometry, weight and ride characteristics. This process involves fine adjustments to the shocks. Most shocks have at least these adjustments:

  • Preload (or how stiff the shock feels)
  • Rebound speed (how fast the suspension returns after a bump).

Some specialized shocks may have more adjustments. In either case, read the shock specific user manual for the model you get.

All of the above also applyes to MTB suspension forks, except for the looks and the routine cleaning part.

share|improve this answer

You're mixing up two different concepts.

The damper, which is what slows things down. The spring, which is what holds the weight and absorbs shocks.

The damper is usually hydraulic, oil being forced through a small hole. The spring is either a coil or pressurised air.

Without a damper, you'll have a very bouncy ride and without a spring, you'll have a very stiff ride. The 2 work together to provide a nice ride.

Also, those 2 bikes target different styles of riding.

The Slash is an Enduro bike and the Voltage a Freeride bike.

share|improve this answer

A hydraulic shock will have better damping...which is what a shock is supposed to do: dampen the hits to your suspension. Hydraulic shocks still have an air spring. Spring shocks are the cheaper way to go - just not as good. High end bikes will have a hydraulic shock.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.