Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Ok so I've been riding bike since I was as young as I can remember. Now I'm 18 and I've been given a fixie. But I know nothing about bikes I've always just ridden them and brought them to a shop when they broke. The fixie I have is basic and when people ask what ratio I run and other things like, "What cogs have you got?". I've tried searching online but I can't find a definitive guide to fixies. Can someone please give me a basic run down of how to improve my lingo and understanding of bikes.

share|improve this question
2  
possible duplicate of Terminology index –  Neil Fein Apr 8 '13 at 14:26

2 Answers 2

See the terminology index. It doesn't apply just to fixies, but a lot of the parts on either kind of bike are the same.

share|improve this answer
1  
Agreed. Ethan, feel free to add to the terminology index; you only need 100 rep to edit CW posts. And even if you're vague on what a term means, put it in anyway and someone else will improve it. –  Neil Fein Apr 8 '13 at 14:28

I agree with you. I have 2 road bikes, 1 mountain and 1 fixie. In terms of understanding the bike - not just the terminology but understanding parts, sizes etc. - the fixie has taken up more of my time than all the others put together.

The reason for this is that although the bike itself is a simpler arrangement (i.e. no derailleurs to worry about), there appear to be far more variations. Also I find that when I need to make purchases I'm looking at very niche shops, rather than just popping down to my lbs.

It might help you to look at a couple of the specialist web sites I look at - Velosolo and Tokyo Fixed. These are both vendors (and both uk-based) so probably not quite what you're after. But in terms of terminology they should still be quite helpful. Plenty of photos with descriptions etc. Velosolo in particular has some good FAQs in addition to the "shop" bit.....but note that even they refer to Sheldon!

share|improve this answer
    
No offence but what do you need that you can't get from your LBS? Unless track cycling is non existent by you I'd imagine they would have all the parts necessary, the only difference between a fixie and standard bike is the rear hub –  will Apr 12 '13 at 8:27
    
I bet my lbs doesn't carry a White Industries ENO 16-tooth freewheel in stock, or a 48-tooth 130mm BCD chainring to run a 1/8" chain, for that matter. But I may strike lucky with a 103mm bb, and I'm sure I'd fine a 1/8" chain no problem. My point is that none of this is as simple as walking into a shop and saying "I'd like a Shimano 105 bottom bracket, please" –  PeteH Apr 12 '13 at 12:34
    
They don't stock it, but I'm sure most would be able to order it. Most bike shops would probably have a 16 tooth freewheel, but they might not the the exact manufacturer you want. Also White industries freewheels are quite a high-end component, and I really wouldn't expect them to keep everything in stock, especially for something that is unlikely to spontaneously break. –  Kibbee Apr 15 '13 at 16:23
    
I know I can order these things, how else do you think I get them? What is the advantage in ordering through a bike shop when I can order the parts (with the manufacturer I want) myself? –  PeteH Apr 15 '13 at 19:53

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.