Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Here on bicycles SE I often read questions about right sizing of a bike, how you should sit on a bike, what to do when some part of your body hurts etc. I also came across the answer

Go to a local bike shop and have a bike-fit

quite often.

I wonder how this "bike-fit" is done? How can I do it myself?

share|improve this question
    
youtube.com/watch?v=xIoxArOU4B8 This video could be userful –  J-unior Jun 13 '13 at 11:12

1 Answer 1

For an actual fit, you can't really do it yourself without extended riding and testing, usually with a powermeter or other method to measure performance, and someone willing to take video and still shots of you on your bike.

What a fitter should be doing is measuring your body morphology (shape and structure), and then using that to get you into a correct sized frame (whether it's road, mountain, time trial, etc), and then adjusting the fit using different length stems, handlebar widths, seat posts/seats, etc. to get the bike comfortable.

There are several different methods, including Fit Institute Slow Twitch (FIST, usually used for time trial/triathlon frames), GURU, Retul, eyeball and a few others. Many of these use fit bike mechanisms where the "frame" that you are sitting on can be lengthened, shortened, raised/lowered, etc. Some (Such as the Retul) also have cameras that can pick out and measure all the different lengths and angles and provide a printout.

A fit, however, is only as good as the person doing it. There are good and bad fitters, and if you really want a good fit, I would do some research on the local fitters and their experience/certifications and word of mouth reputation.

A "good" fitting will probably cost between $150 - $500 US dollars, depending on the type of fit, follow up sessions, and number of bikes being fitted.

Part of the reason for the variance is that frame manufacturers (Especially in time trial/triathlon frames) do not really follow a "standard" measuring convention, and a 54cm top tube bike from Trek may fit very differently than a 54cm top tube bike from Specialized. Also, someone that is 5'10" with a 34" inseam will fit a bike very differently from someone that is 5'10" with a 30" inseam.

If all the guy does is have you stand over the top tube and say "Yeah, that'll fit ya", I would definitely seek a different shop.

share|improve this answer
1  
+1, but I'd like to add that fitting depends on what you're looking to get out of it. Getting a tri bike fit for racing is going to take a lot more work than finding a commuter bike for short trips in your neighborhood. –  user2432675 Jun 13 '13 at 15:16
    
This is true. General round the block type fits are easy, the further up the food chain you go on the racing scale (road and tt/tri) the more complicated it gets. –  JohnP Jun 13 '13 at 15:20

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.