Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Will a steel headset get stuck on an aluminum frame bike?

Will an aluminum alloy headset get stuck on a steel frame bike?

I am not asking about carbon frames, by the way.

I ask because I have seen some questions about aluminum alloy seatposts getting stuck in steel frames, and I wonder if the same kind of "galvanic pair" issue would cause a steel / "chromed steel" threaded headset to get stuck into an aluminum frame.

Would doing this make the headset impossible to replace? Does it even matter if it is impossible to replace if the bike is not extraordinarily fancy?

I'm not worried about the short term, but am wondering about best practices when assembling old bikes from scrap parts.

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Seatposts have a relatively long length inside the tube, and no way to get a tool to the bottom of the post to hammer it. If you have a proper headset remover tool, I doubt a headset would ever get so stuck. (Even without the proper tool, it's unlikely to be a problem.)

Also, I don't believe there's such a thing as a headset with an alloy bearing race. So if it has alloy cups, they probably have replaceable bearings that fit inside it, so the cups shouldn't ever need replacing.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.