Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Any alternative use for old mountain bike tyres and inner tube?

So my frame has a large crack near the headtube and I am replacing it. Could I use the frame in any other way? E.g.

  • give it away for recycling, get a few beers with the money
  • make vases from the tubes
  • make shot glasses from the tubes (e.g. with wooden bottoms)
  • beat people with it (!?!? one friend proposed this)

Anything more sensible? Maybe I could make some tool or stand out of the material?

share|improve this question
    
Should be able to strip off all the parts and recycle it. It's better aluminum than cans. Otherwise some sort of art project. –  Daniel R Hicks Sep 26 '13 at 11:18
1  
@DanielRHicks R Hicks, I just checked, the local prices for scrap aluminum are about 2 beers per kilogram. And I anticipate difficulties removing the headset cups and the BB. –  Vorac Sep 26 '13 at 11:33
1  
If you're scrapping it, just hacksaw off the headset and BB. –  Chris H Sep 26 '13 at 11:55
    
FWIW If you have a hammer and a 8 inch piece of pipe you can remove the headset cups no problem. –  WTHarper Sep 26 '13 at 12:32
2  
"about 2 beers per kilogram" -- That'll make you wish you'd gotten a heavier frame. –  Daniel R Hicks Sep 26 '13 at 15:11

4 Answers 4

I've been thinking about a similar question for my old bike. This google image search might give some inspiration.

More people seem to have the idea to do something with their old bike:

Though most re-use seems to focus on the parts that wear out quicker (tires, tubes, chains, sprockets, etc.)

share|improve this answer
1  
+1 for the church of cycling image –  Benedikt Bauer Sep 26 '13 at 11:52

Do you need a bike hanging bracket, or even a wall mounted work stand? The front triangle as in the church of cycling lamp image suggests how, and old tubes could be used to give it some grip and prevent it damaging a bike hung from it.

Or how about a single wheel bike trailer?

share|improve this answer

Use as a dedicated truing stand. While not adjustable, the fork could be used for front wheels, back for rear wheels.

share|improve this answer

Pity it's aluminium - I made a nice set of windchimes from an old steel frame that died, but I don't think aluminium would ring as well.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.