Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I took my frame to a bike shop to have the threads chased on the drive side. When I got home, I realized that they didn't install the plastic sleeve (because I didn't give it to them). They didn't say anything about it, so is that just to keep out dust/grime?

And what's the official word for that plastic sleeve?

alt text

share|improve this question
add comment

2 Answers 2

up vote 5 down vote accepted

If you are talking about the things that look like thin, wide plastic washers that go on the outer part of both sides of the bottom bracket, they are called bearing seals.

Assuming that you are saying that the bearing seals were not installed, then I would absolutely remove the cranks and install them. They are designed to keep most of the road gunk out of your bottom bracket, helping it to last significantly longer.

If you have the appropriate crank puller then you can do it yourself. Remove the cranks, put a light coat of grease on the inner side of the seals and then press them firmly into the bottom bracket. They should seat firmly into an outer groove on the bottom bracket.

If you are talking about the clear plastic cylinder in the pic then I don't know what it is officially called, but I think you can do with out it. Not having it may mean that you need to check and tighten your bottom bracket more frequently, but I don't believe it's necessary.

share|improve this answer
    
I was referring to the clear plastic cylinder. I've since found other forums where people are saying it isn't necessary but good to have. I'll put it back in the next time I work on the bike. –  Jay Oct 24 '10 at 15:40
    
That's what I would do - there is usually a drain hole in the frame, and the cylinder will help keep gunk from getting into the BB that way. –  Gary.Ray Oct 24 '10 at 20:59
add comment

I took a quick look at the Truvativ warranty information and the warranty is void if the BB is not installed properly. Since it's not currently installed properly if anything happens to it then you've got no warranty technically.

share|improve this answer
    
good to know, although i'm outside the warranty (the frame is new...not the bottom bracket). –  Jay Oct 24 '10 at 15:39
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.