Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I bought a 2014 kink curb and I think I may need to buy new bars because my stem is cutting into them. I don't know though. If anyone could please help me with this.

share|improve this question
3  
Please use English. –  Batman Dec 20 '13 at 23:42
2  
You've got to put a little more effort (and punctuation) into your question if you want some help. Maybe a picture to show what you're talking about. –  joelmdev Dec 21 '13 at 2:15
    
If the handlebars are slipping in the stem clamp, the clamp is not tight enough. If there is no remaining gap between the two sides of the clamp where the screw tightens it, you need to 1) replace the clamp, 2) replace the handlebar, or 3) insert a shim (can be cut from a beer can) between clamp and bar. –  Daniel R Hicks Dec 22 '13 at 13:48
    
Take it back to the retailer! If the bars of your 2014 bike are moving in the stem you have a serious assembly error. –  Emyr Dec 30 '13 at 8:45

1 Answer 1

Depending on design, try ensuring all bolts are tightened evenly (so if the top two are done up all the way and the bottom two are not, undo them all and redo them evenly)

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.