Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I want to change all the cables in my bike. My knowledge in bikes is limited. As i found there are cables for the brakes and cables for the shifters. My question is: are those cables all the same? i.e. if I want to change the shifters and brakes cables, should I only buy two quantities of breaks cables?

Because I found these http://www.fahrrad.de/fahrradteile/felgenbremsen-zubehoer/clarks-universal-bremszug-komplett-kit-vorne/337558.html and I wonder if I should order two quantities or one of this and some other kind of cables for the shifter.

p.s. do I need to buy a cable for each brake handle? Does that mean I need to buy 2 just for the brakes and also 2 for the shifters? Viz, 4 boxes of that in the website?

share|improve this question
    
@PeteH ok, but do I need two boxes of that or only one? –  Alex Twain Jun 10 at 13:13
    
Brake and shifter cables are different to each other. Last time I replaced mine, each one came as a pair of cables, i.e.one pack of each would sort both front and rear. I don't know if there are other buying options. If you're planning on doing the job yourself you'll need some sharp wire cutters e.g. Park Tools –  PeteH Jun 10 at 13:22
    
@AlexTwain I get you got an old bike and you have chosen to fix it up. Rather than ask general questions one at a time I suggest you get book on bicycle maintenance. Use SO for specific questions. Based on a previous post those cables don't look that bad. You stated you are on a budget. Did you first try lubricating the cables? –  Blam Jun 10 at 13:30
    
If you use a shift cable (compressionless housing) for your brakes, they will burst and your brakes don't work. Normally, you can buy a set of all the shift and brake cables and housings at your bike shop. But you need a cutter tool (dremel if you want to hack it), which is not cheap. –  Batman Jun 10 at 14:55

1 Answer 1

Standard brake cables are 1.6mm thick and have either a cylindrical end perpendicular to the cable for MTB-style levers, or an inline stepped-cylinder (like a pear) for road-style levers.

Standard gear cables are 1.2mm thick and have a smaller cylindrical end, inline (cable enters circular face).

By standard, I mean both Shimano and Campagnolo use these gauges and end-styles and I'm not aware of any other variety used by gear or brake levers in current popular use...

share|improve this answer
    
As the inner cable gauge is different, there are different types of outer-cable (or casing) for gear and brake, one being made of strands of wire, the other formed from a strip of metal. –  Emyr Jun 10 at 14:25

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.