Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Some years ago, I picked up a Cannondale R3000 and moved all the components to my current bike as an exercise in bike building, never repeated (in fairness, the Cannondale fit me a little better but my beautiful 1998 Klein has such a sweet, sweet paint job...). I've been putting the frame on Craigslist off and on for a few years, but no one seems to want to pay what I'm asking. Regardless, my current MTB is an all-mountain beast that I bought before I knew my riding style, and I'm thinking of picking up a more cross-country steed.

Times being tight and all, is there anything preventing me from building out the Cannondale road frame as a mountain bike? Obvious [potential] answers (e.g., tire clearance) are good, more involved ones (e.g., frame robustness) are too. I'm trying to get a picture of what might lie ahead in this venture.

share|improve this question
    
The first bikes Cannondale made were touring bikes, and one of those would probably suit you pretty well in this situation. But the R3000 is apparently an all-out racing bike and not a good choice for off-road. –  Daniel R Hicks May 16 at 14:58

3 Answers 3

up vote 9 down vote accepted

If you want to use it for "proper mountain biking" (however you define that) the answer is almost certainly no. You won't be able to fit wide enough tyres to give you decent grip, and punctures are likely to be a problem. Additionally, the geometry will be all wrong (if you put straight bars on it you'll probably feel quite cramped without a long stem, which will make the handling wierd). That's without getting into the strength issue - Cannondales have always seemed quite fragile to me (but that's an opinion only, never owned one).

However, if you want something for blasting along relatively smooth forest trails that aren't muddy, fit the widest grippiest tyres you can and give it a whirl. Despite what I said about strength in relation to proper mountain biking, road bikes are surprisingly strong provided the forces are applied to them in the way the bike is designed. A few small bumps are unlikely to break it assuming you're not a large rider, you don't try jumping and you don't crash. It'll be a very different experience from a proper mountain bike, but on the right trails could still be a lot of fun.

Ultimately though for proper cross country mountain biking you do need a mountain bike (or a cyclo cross bike). I'd suggest trying ebay with a reserve price to find out what people are prepared to pay for it. Second hand aluminium road bike frames aren't that desireable any more, even if they did have dura ace on them when purchased, simply because carbon frames are so much cheaper. However, second hand mountain bike frames are also pretty cheap, and a couple of hundred dollars towards one from selling the R3000 frame is infinitely more than nothing if it's just gathering dust.

Hope this helps.

share|improve this answer
    
Just the comments I needed! As an added bonus, some friends also mentioned that brakes were going to be real trouble (mounting Vs or discs is right out). Oh well, guess I get to find something newer. –  kyle Jan 4 '11 at 20:53

Converting to a straight-up mountain bike would be hard. Converting a road bike to a 650B bike capable of handling dirt trails and gravel is a pretty established practice, mostly entailing swapping the wheelset and brakes: http://www.cyclofiend.com/cc/2010/cc769-joehuddleston0410.html It's more usually done on older frames, but nothing necessarily precludes doing it on a newish racy frame. However, a narrow chainstay/seatstay/fork gap may make fitting fat tires difficult.

However, you'd be able to pick up a decent used mountain bike for the price of a decent 650b wheelset, especially if you'd be fine with a rigid bike. $125 or so can get you Tange Prestige with early 90s Deore LX and the like.

If you want a project for your R300 frame rather than selling it cheap, there's always a singlespeed conversion (the Wabi wheelset is great for the price).

share|improve this answer

I would strongly advise against converting an aluminum Cannondale road frame to mountain bike duty. They're not built to take the headtube stress a typical suspension fork will inflict on the frame. If you keep a rigid front fork and go the cyclocross route, you'll have better luck.

share|improve this answer

protected by Gary.Ray May 19 at 20:42

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.