Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Some years ago, I picked up a Cannondale R3000 and moved all the components to my current bike as an exercise in bike building, never repeated (in fairness, the Cannondale fit me a little better but my beautiful 1998 Klein has such a sweet, sweet paint job...). I've been putting the frame on Craigslist off and on for a few years, but no one seems to want to pay what I'm asking. Regardless, my current MTB is an all-mountain beast that I bought before I knew my riding style, and I'm thinking of picking up a more cross-country steed.

Times being tight and all, is there anything preventing me from building out the Cannondale road frame as a mountain bike? Obvious [potential] answers (e.g., tire clearance) are good, more involved ones (e.g., frame robustness) are too. I'm trying to get a picture of what might lie ahead in this venture.

share|improve this question
add comment

2 Answers

up vote 8 down vote accepted

If you want to use it for "proper mountain biking" (however you define that) the answer is almost certainly no. You won't be able to fit wide enough tyres to give you decent grip, and punctures are likely to be a problem. Additionally, the geometry will be all wrong (if you put straight bars on it you'll probably feel quite cramped without a long stem, which will make the handling wierd). That's without getting into the strength issue - Cannondales have always seemed quite fragile to me (but that's an opinion only, never owned one).

However, if you want something for blasting along relatively smooth forest trails that aren't muddy, fit the widest grippiest tyres you can and give it a whirl. Despite what I said about strength in relation to proper mountain biking, road bikes are surprisingly strong provided the forces are applied to them in the way the bike is designed. A few small bumps are unlikely to break it assuming you're not a large rider, you don't try jumping and you don't crash. It'll be a very different experience from a proper mountain bike, but on the right trails could still be a lot of fun.

Ultimately though for proper cross country mountain biking you do need a mountain bike (or a cyclo cross bike). I'd suggest trying ebay with a reserve price to find out what people are prepared to pay for it. Second hand aluminium road bike frames aren't that desireable any more, even if they did have dura ace on them when purchased, simply because carbon frames are so much cheaper. However, second hand mountain bike frames are also pretty cheap, and a couple of hundred dollars towards one from selling the R3000 frame is infinitely more than nothing if it's just gathering dust.

Hope this helps.

share|improve this answer
Just the comments I needed! As an added bonus, some friends also mentioned that brakes were going to be real trouble (mounting Vs or discs is right out). Oh well, guess I get to find something newer. –  kyle Jan 4 '11 at 20:53
add comment

I would strongly advise against converting an aluminum Cannondale road frame to mountain bike duty. They're not built to take the headtube stress a typical suspension fork will inflict on the frame. If you keep a rigid front fork and go the cyclocross route, you'll have better luck.

share|improve this answer
add comment

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.