Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

If I know my jeans size, for instance 32", 32", can I convert this into an estimate for standover height on a bike?

share|improve this question
add comment

3 Answers 3

up vote 10 down vote accepted

This might not be a very good place to start from when sizing a bicycle. Your inseam measurement is from the top of the crotch (top inseam point) to the BOTTOM SIDE OF THE ANKLE (lowest inseam point). Your feet go all the way to the floor.

Inseam is specifically to determine what pants you wear. I might point out that pants and bicycles are made and sized quite differently.

As @darkcanuck suggested, you're better served to stop by a local bike shop (LBS) and have them size you. Most LBS sales people will be more than happy to put you on a couple of bikes and let you take a test ride, even if you say, "I don't plan to buy anything today, I'm just starting to shop around." It won't cost you anything and you'll start to get a feel for how different styles of bikes feel in different sizes.

Note also that standover is not the only measure you need to size your bike. The TOP TUBE length will also come into play--depending on how long your arms and torso are. Different manufacturers build different bikes with different ratios of top-tube-to-stand-over.

Depending on the bike, you will also want to consider handle-bar width, crank-arm length, etc. Don't plan to buy a bike off of the internet because it has the right stand-over! At least, don't be surprised if you do so and then it doesn't feel right.

Try out several actual bikes--even if they aren't ones you plan to actually buy--so you know how those different geometries feel when you're riding.

AND IF YOU'RE LOOKING AT A USED BIKE... it still pays to try out some new ones and know what geometry suits you. When you are negotiating with a seller of a used bike, show up with tape measure in hand!

share|improve this answer
    
@"Don't plan to buy a bike off of the internet" I just saw a posting on Craigslist that ~2 from my inseam and I wanted to estimate whether driving 45 minutes was at least worth it based on the sketchy info I have so far. Thanks for also bringing up the tube ratio, that is actually much more important to me (my last bike was an unrideable fit). –  mfg Jan 5 '11 at 21:27
add comment

It's close enough for a very rough guess, but in most cases (especially if using a sizing formula) you'll want to measure the distance from the ground right up to your pubic bone. Unless your pants drag along the ground, you're inseam size will be a bit shorter: somewhere in the range of 1-3" (as a guess).

You can get this quickly measured at many road bike shops as part of the shopping process (i.e. it should be free).

share|improve this answer
add comment

The short answer is no. For information on frame sizes and all things bikes, consult the late Sheldon Brown's website: http://www.sheldonbrown.com/frame-sizing.html

It's an incredible resource!

share|improve this answer
1  
That's good. I was also impressed with peterwhitecycles.com/fitting.htm –  DC_CARR Jan 6 '11 at 20:50
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.