Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

When I got my new bike with disk brakes, I thought that they would perform much better in the rain. While this is true, they still squeak quite loud in wet conditions, which is quite annoying. Is there a certain type of disk brake or brake pads which perform better in the rain and aren't so loud?

share|improve this question

3 Answers 3

up vote 7 down vote accepted

The only way that I've found to get them to stop squeaking is to burn the water off. Big steep hill and stop at the bottom.

As for performance, I don't notice any difference in the feel of my BB7's in the wet vs. the dry after a couple seconds of use. Even in rain puddles up to the bottom bracket.

share|improve this answer

I eventually learned to live with it. I've tried different brake pads, and even ones that claim to be less noisy. No difference.

Really what we're talking about is the same thing behind rubbing a finger on a wine glass, or scratching chalk across a blackboard. "Slip-stick motion". What really makes it loud, I think, is the high tension bicycle wheel.

I agree... it's really embarassing, especially when pulling up to a stop. Everyone around thinks some train is stopping haha, or they think your brakes don't work. Quite the contrary, they are working pretty good actually!!!

share|improve this answer

Have you tried this?

I realize that's for dry-squeals, but having a more abrasive surface may reduce wet noise as well, and even if not it should decrease the time it takes to burn off the water.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.