Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

As far as I can tell just the Outboard BB is.

share|improve this question

2 Answers 2

up vote 3 down vote accepted

According to the Phil Wood FAQ:

What is the difference between JIS, JIS low profile, and ISO tapers?
Phil Wood offers all three tapers to try and best meet the needs of our customers who are using square-tapered bottom brackets. An explaination of the different bottom bracket tapers can be found here. In brief, most modern cranks will take the JIS (Japanese Industrial Standard) taper, in addition to Campagnolo cranks produced before 1994. After 1994, Campagnolo moved to the ISO (a.k.a. Campy) taper. The less common of the three tapers offered is the JIS low profile, which is used in some specific older-model Dura Ace cranks.

Since Shimano square-taper cranks are J.I.S. (not low-profile), this means that all Phil Wood bottom brackets with JIS spindles are compatible, as well as Outboard Bottom Brackets.

share|improve this answer

Shimano uses a JIS taper (Japanese Industrial Standard). Take another look at their catalog and any bottom bracket (there are too many to list) that uses the JIS standard will work with your XT cranks. DO NOT get the JIS low profile, as those will not fit, stick with plain JIS and you should be GTG.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.