Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have a Truvativ FireX chainset from 2008ish, I'm looking for a replacement middle chainring however, no shops seem to stock replacements for Truvativ chainsets.

Just wondering if anyone has any recommendations for chainrings that should fit a Truvativ Firex chainset (i.e. is there an industry standard size for them, or do they vary).

Thanks for any help.

EDIT: In the end I couldn't find one online from a reliable source, so I went to a local bike shop, and they had one in stock (Cost more than the shimano alternatives though).

share|improve this question

1 Answer 1

up vote 2 down vote accepted

According to this bike shop it takes Shimano 4 bolt 104mm/74mm BCD chainrings, so you should be able to use the Shimano rings. If you have a spare bike and the right tools, take the cranks off, remove the ring and take both into a shop. That way you/they can check the fit before you buy a chainring. It's one of those times when you're better off paying a premium for LBS service so you don't end up buying multiple wrong parts online.

I don't know how (un)common those chainrings are, but we still get them as a new stock item in Australia and there seem to be lots of hits in google

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.