Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Looking for chains at ebay, I see, that they have 106, 114, 116 links and so on.

I have a racing bike (2x7) and see, that chains are often announced as 6-7-8-speed, 10-speed, 11-speed. Since there are some prime numbers, I guess it is only back gear, which is taken into account?

I found one picture with a printing on the containment: "6-7-8 speed" and "116 Links". So am I right - would this thing be alright for me, or do I have to take more information into account?

Manufacture of the bike is Peugeot, of the mechanics: Shimano exage, an 80ies bike, and the chain lost attachment very abruptly after the cold winter. I'm not stick to Shimano, if I don't need to. Location Germany, if this is of importance.

share|improve this question
add comment

3 Answers 3

up vote 8 down vote accepted

The speed is the number of cogs on the rear cassette. This matters because higher numbers of gears (esp 9speed) mean that the chain must be narrower to fit between them. Generally 6-7-8 speed chains are the same and 9 speed are thinner, more than 9 speed is a bit specialized.

The length isn't as important because you will usually have to shorten the chain to fit your bike. The standard chain is 114 pins (56 links) but you almost never need to know this ( I had to look it up!).

share|improve this answer
    
Aha. And I need a special tool, to shorten the chain, and depending on the manufactor (Shimano, Rholoff, others) different tools? –  user unknown Apr 19 '11 at 22:08
    
Yes you need a chain breaker tool (a cheap one will do for occasional use) you don't need a different one for each typ eof chain –  mgb Apr 19 '11 at 22:27
    
There's two sort of chain tools - adjustable ones, and ones that only work well on one width of chain. The adjustable ones have a screw adjuster as well as the rivet pusher and can be adjusted to fit any chain. Fixed size ones will often work on a range of sizes, but you have to be a little careful. –  Мסž Apr 20 '11 at 4:04
add comment

Gotta love Sheldon. Here is ... some chain length info

share|improve this answer
2  
While this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference. –  freiheit Mar 7 '12 at 16:14
add comment

The only caveat is certain types of Shimano chains which require special pins; they are extra-long and you break off the section after putting the chain together. A lot of the chains you get from Walmart and other sources have a "quickie" link, a special link that just snaps the chain together. however, you will still likely have to shorten the chain.

Best practice is to save the old one and use it to measure.

share|improve this answer
    
New Shimano chains come with at least one joining pin because you have to attach the chain somehow. The cheap ones only come with one pin, the rest should come with two. –  Мסž Apr 20 '11 at 4:05
    
When you measure your chain you want to count links to measure.If your use a ruler the count will be different due to the chain getting longer as it wears. –  mikes Mar 8 '12 at 2:02
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.