Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Among the bikes in my stable is a department store tandem that really isn't worth much, but would be enjoyable to ride with my wife. Like many department store bikes this one was not assembled correctly and now the pedal threads on the right front crank are beyond stripped, there are millimeters of smooth clearance around where it would screw in. It doesn't appear that it could be re-threaded.

The problem is, on a normal bike the right crank has the splines for the chainrings, and the left is unadorned. On the front crank of a tandem this is backwards. So while I can find replacement left crank arms, what I really need is a plain 170 mm right crank arm.

I've searched my usual online retailers to no avail - and don't want to spent the $$$ for a full, 4 crank arm tandem set.

Anyone know where I might find one?

share|improve this question
    
Worst case you could use a left crank and rely on threadlocking compound to stop recession unscrewing the pedal : bikexprt.com/bicycle/tancrank.htm –  armb Sep 9 '13 at 15:50
add comment

3 Answers 3

up vote 1 down vote accepted

I know that some BMXs have left side drive. I actually found this out by accidentally ordering a left hand freewheel that was backwards on my single speed!

I don't know if these cranks will work for you but it might be a place to look. Wikipedia describes left side drive here .

JensonUSA have Sugino tandem crank arms sold separately.

share|improve this answer
    
Searching for Sugino Tandem Crank Arms and similar eventually let me to precisiontandems.com - they had single arms but JensonUSA had a better deal. –  Gary.Ray Jun 16 '11 at 5:10
add comment

The cheap options are fitting a helicoil or equivalent to replace the thread, or finding another cheap tandem that's been wrecked and get the part from that. The helicoil is probably the easiest option, but if you can find a wrecked tandem that will possibly be cheaper.

There are companies that re-tap cranks for tandems (Greenspeed is one) but that adds $50 or so to the cost, however it may be less because they have a surplus of spider-less cranks (a tandem needs three spiders and one spiderless crank, leaving two spare). It would be worth asking them.

share|improve this answer
add comment

There is a nice bargain priced set on ebay right now - Sugino, search 'tandem crank' should get you there. Get your bid in, sure the crank will be good and you will have spares for all the rest. Failing that you can get a spare from Middleburn in the UK - pop them an email.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.