Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I am thinking about buying a CO2 tyre inflater. I have never used one before and have 3 questions:

  1. Do they have enough pressure to get a road tyre up to full pressure (~100psi)
  2. When you use a cartridge, do you have to use the entire cartridge at once?
  3. Are there any common cartridge standards? i.e. am a better off going with a particular brand because it is compatible with more brands of cartridges.. or are they all happy to mix and match?
share|improve this question
add comment

2 Answers

up vote 10 down vote accepted
  1. Yes, this is no problem, though I would suggest practicing once before you have to use it on a flat. The first couple of times I used an inflator I had trouble inflating my tire fully.

  2. No, but I've found that once I start a cartridge it will leak slowly, so it doesn't last forever. In my experience it doesn't last more than a few hours, certainly not more than a day.

  3. You can buy inflators that handle both threaded and unthreaded. For example, this one -- http://www.amazon.com/gp/product/B00278XO0Q -- can take any 16g CO2 cartridge.

share|improve this answer
    
I've been able to use a partially-used CO2 cartridge months after the initial use. If yours are losing air, it's due to a faulty nozzle. –  Stephen Touset Jun 17 '11 at 15:29
    
I never realized that. Thanks for the tip! –  jaustin Jun 18 '11 at 0:43
add comment
  1. Yes.
  2. No.
  3. Threaded and unthreaded.
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.