Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

The lock side is great, however, shoes does not stay on the platform side. Your leg always slip out from the pedals during pedaling. Any solution to improve it?

share|improve this question
1  
I have these pedals, and don't have this problem. Perhaps it's your shoes? –  Stephen Touset Jun 21 '11 at 13:30
    
I second what @StephenTouset is saying. I have these pedals as well, I found that which shoes I'm wearing makes a big difference. The harder the rubber on the bottom of the shoe, the worse it is. –  Kibbee Oct 2 '12 at 13:43

6 Answers 6

up vote 4 down vote accepted

Some people have modded the pedals to add set-screws which provide better grip. Typically this involves drilling a hole, tapping it for threads, and adding a set screw of the desired length.

For example, here's an a530 with 2x set screws added: Shimano A530 with Set Screw Mod

share|improve this answer
1  
This will obviously void any warranty, and the placement of the set screws need to be chosen carefully, but it does work. –  zenbike Jun 21 '11 at 16:23
1  
As an addendum, tapping blind holes (i.e. a hole with a bottom) can be tricky and usually requires two taps. To avoid this problem, I used JB Weld which is super strong and very permanent. I bought 1/8" stainless threaded rod and cut it to length and it works brilliantly. –  WTHarper Oct 2 '12 at 14:22

This seems an easy solution pretty easy to take on and off:

enter image description here

share|improve this answer
    
They're great, but I don't think the PD-A530 has a cage you can fit them to. –  Useless Oct 2 '12 at 14:29

I wired a piece of rubber tubing around the front and back beams on mine and it helped a lot. I like the skateboard tape idea and will try it. These pedals are beautifully finished but the edges of all the lugs are rounded over and then hardcoat anodized resulting in a really slippery pedal; your feet tend to slide sideways and go off the outside edge periodically. Wearing SPD MTB shoes on the flat side is the worst, especially when the cleat reaches the outside edge. Running shoes are definitely better. None of this has anything to do with technique; I have old style metal and rubber pedals that you slide off of if you hit a large bump, otherwise you're fine, but these are slippery enough that you can nail your ankle pretty easily. There are a bunch of pedals like the mentioned Shimano M 324 that I think should be better, mostly at the expense of increaded wieght.

share|improve this answer

I would pay a visit to your local skateboard shop and get some 'skateboard grip tape'.

This should be inexpensive and it can be applied in such a way that your pedals are not permanently damaged. The glue on the stuff is pretty good and it is pretty much totally designed for keeping feet in place.

Your pedals might look a bit naff with bits of tape wrapped around them, a further consideration is that you could go away from the normal black and get hi-viz tape.

share|improve this answer
    
a good alternative to drilling and milling metal; grip tape is very friction-y –  Jeff Atwood Jun 22 '11 at 8:54

Perhaps you need to change your pedalling style when you're riding without clips: push (only) down onto the pedal, instead of spinning.

That's why you have clips.

share|improve this answer
    
And it's desirable that you do develop the habit of lifting a bit on the upstroke when pedalling. So perhaps bicycles.stackexchange.com/questions/3906/… is a better solution :) –  Мסž Jun 22 '11 at 1:20

I'm not sure there is a good answer to this question. It probably depends most on what type of shoes you wear. Have you tried using trainers/sneakers with a rubber sole? I wouldn't want to try and modify the pedals as you may risk damaging them.

If you want a really good reliable pedal connection on the platform side, I reckon the Shimano M324 pedals are more likely to suit.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.