Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

When you are not dealing with carbon, is torque relevant?

I've never seen it mentioned on the hundreds of answers here, or the hundreds of how-tos I've read elsewhere.

Should I just tighten everything "hard enough"? If not, what's the best way to find the torque specs for old parts?

share|improve this question
add comment

2 Answers 2

up vote 4 down vote accepted

Here's a page that tells you everything you want to know about torquing bike parts. It's by the recognized leader in manifacturing bicycle specialty tools, including one of the more popular torque wrenches. (Park Tool)

share|improve this answer
    
Please consider summarizing this page. Also see: Are answers that just contain links elsewhere really “good answers”? –  Neil Fein Jul 17 '11 at 2:06
    
How about "Here's a page that tells you everything you want to know about torquing bike parts"? –  Daniel R Hicks Jul 17 '11 at 2:23
1  
Cute. I actually answer the guy's question and get dinged. –  Daniel R Hicks Jul 17 '11 at 3:01
add comment

While torque specs do definitely still matter with steel and aluminum parts, they are not nearly as sensitive to it as carbon parts are.

We often mount an aluminum stem on a carbon steerer tube, or handlebar. It is the torque spec for the aluminum stem which matters most, but the bar will also have max torque spec, and the parts used must allow the same torque range values, or they may not be used together.

The Park Tool link provided by Daniel R. Hicks is an excellent resource for learning more detailed concepts about torque, as it relates to bicycles, and finding the exact values for a particular part.

Most modern bike parts have the torque printed on the clamping portion of the part as well, somewhere near the bolt/s that the torque is referring to.

Hope that helps.

share|improve this answer
    
Slight disagreement. I'd say that Al components are very nearly as torque sensitive as CF. I agree about the Steel though, it's still important, but a much greater margin for error. –  Brian Knoblauch Jul 18 '11 at 13:41
2  
True, but for different reasons. The worst you'll (usually) do on aluminum is strip out a bolt hole, but on carbon, usually you crush/fracture the part you're clamping to, and at far lower torques. That all I was tying to say, but I should have been more precise. –  zenbike Jul 18 '11 at 14:01
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.