Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I've got one of these stems:

Stems

It's currently fully inserted into the bike, and it's too low for me.

Can I simply loosen it, raise it 5cm and tighten it again?

What's the minimum length that should be inserted? will there be markings like on the seatpost?

The stem is Aluminum. The frame is Steel.

share|improve this question
add comment

2 Answers 2

up vote 3 down vote accepted

With most older quill stems, there must be a minimum of one inch of the stem (above the binder wedge) inside the frame for safety.

Most stems have marks on them similar to seat posts, yes. The longer the quill, the more of the stem needs to be in the frame. I suggest 25% of the length as a minimum.

The scratch marks on the stem in the photo you linked show about where that one should be inserted as a minimum.

Yes, you can loosen the bolt and slide the stem farther up, to raise it, with this style stem. How much you can raise it varies by model and your frame.

share|improve this answer
    
thanks. do I need those washers? or are they just cosmetic? –  gcb Aug 2 '11 at 0:25
1  
If you are talking about a washer under the quills binder bolt, yes you need it. if not, please be more specific. I don't see any other reference to washers on this post. If you can, post a photo of them. –  zenbike Aug 2 '11 at 3:12
    
that was it. thanks! so it seems i will have to make a trip to the bike shop after all –  gcb Aug 3 '11 at 20:51
add comment

If you look closely among those scratches there is probably a factory-embossed mark indicating the highest that the stem should be set. That mark should be barely visible above the headset packing nut at the highest.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.