Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

This is almost certainly very simply, but how do you undo the chainring bolts on the SRAM red chainset? I can fit a 5mm (or 8mm can't recall now) hex head into the black screws, but they just spin on the spot. I have tried both the front and back. Some seem harder to spin than the others, but I can't work out how to remove them.

SRAM red crankset

share|improve this question

2 Answers 2

As noted in the comments, you need to use a 6mm hex on the front and a 5mm on the back. Using these both at once will engage the bolts, and they will undo

share|improve this answer

I suspect there's a sort of nut on the back, with a slot for a screwdriver. Difficult to reach without a specially shaped screwdriver, though.

share|improve this answer
    
Ahh thanks - you got me thinking. Not quite right, but a 6mm on one side, and a 5mm on the other actually does it –  J.S. Aug 16 '11 at 3:43
    
Yeah, I was thinking that that would likely be the updated design, but my bikes are too old to have it. –  Daniel R Hicks Aug 16 '11 at 11:40
    
@j.s. - Can you add your comment as an answer and accept it? –  Mac Aug 18 '11 at 9:06
    
Yeah, that was the "specially shaped screwdriver" I was talking about. –  Daniel R Hicks Aug 23 '11 at 15:30

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.