Sign up ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Gates claims their belts do not stretch over their life, so theoretically speaking you should not have to adjust the tension (which appears finicky).

I'm interested in anyone with real world experience. Do you ever have to adjust the tension of the belt, apart from when you have to move the back wheel for another reason, such as to change a tyre?

Gates, who make the belts have a FAQ. I can't get a direct link, but if you go to under the question "What are the benefits to the Carbon Drive systems?" this is part of their answer.

No Stretch – The Carbon Drive belt does not stretch over time like a chain. This means you don’t have to re-tension the belt, or replace the belt due to stretch. This also means no excessive wear on pulleys due to stretch.

Does this claim hold up in practice?

share|improve this question
Have you had problems with yours? My partner's bike has not required any adjustment at all in about six months of daily commuting. – DC_CARR Aug 23 '11 at 20:30
Many car engines use "timing belts" which are fundamentally the same concept. They last 70-100 thousand miles. In much more difficult conditions. – Daniel R Hicks Sep 10 '13 at 11:28
Timing chains in car engines also last many thousands of miles without replacement or adjustment, but it would be wrong to conclude that therefore bike chains can do the same. – armb Mar 27 at 18:57

3 Answers 3

up vote 3 down vote accepted

Once the system is set up correctly you will not need to tension it again until it is time to replace the system. There will be a slight drop in tension over the life of the system but it is not enough to require adjusting the tension. When performing a tire change using a bike with sliding vertical drop outs or an eccentric bottom bracket it is not necessary to re-tension the system, just pop the wheel in and out as you would with a chain.

share|improve this answer

I have a Gates belt drive. After getting tension right (using the iPhone app) initially I did not touch it for a year and was surprised to find it had not changed. For me at least, no stretch.

share|improve this answer

I have been riding a Gates CDC (not Centertrack) belt drive for almost a year now. Gates claims that tension adjustments are not necessary over the lifetime of the belt drive. My experience does not support this claim.

One of Gates' claims is that the belt does not stretch enough to warrant tension adjustment after a break-in period, as you would on a brake or shifter cable. I found this to be true.

However, I have noticed that the tension of the belt changes significantly with temperature (and possibly humidity, though I don't have enough data to test that hypothesis). I have ridden my bike in various weather conditions and temperatures ranging from over 90℉/32°C to under 0℉/-17°C. I use the Gates iPhone app to check my belt's tension. I have noticed that, if the belt is tensioned properly at about room temperature, then the tension in the belt decreases below the recommended tension range when the ambient temperature drops below about 20℉/-6°C. I have noticed problems with the belt drive when tension is too high or too low, including excessive noise, skipping, and misalignment leading to dropping the belt from the sprockets. Therefore, I found it necessary to retension the belt slightly in the beginning of the winter and again at the end of winter.

I'm not certain yet if the weather-related change in tension is caused by frame shrinkage (I suspect this is the case - my frame is aluminium) or by another factor.

share|improve this answer
This means, as long as you do not winter riding, you do not need to adjust it. Which is a valuable information. – user375251 Apr 14 at 9:16

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.