Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I just picked up an '09 Transition on craigslist, and was expectantly dismayed to find that the stock brakes aren't quite wide enough for my Zipp 404 firecrests. When I remove the straddle cable (unsure if that's correct term for this particular type of brakes), they open up enough for the super wide 404s.

Does anybody either a) know the part number for the straddle "cable" that came stock, so I can order a slightly longer one or b) have any suggestions for how I can open the brakes up another 4mm?

Thanks.

Reference image: http://imgur.com/YPYdx. What I'm calling the "straddle cable" is what connects the two calipers.

share|improve this question

1 Answer 1

up vote 3 down vote accepted

This part is specific to Specialized. They only make one size. If you loosen the center cable, it should have more than enough clearance for a Zipp wheel, even if you have the new Firecrest design.

The straddle clip can be replaced with a standard cantilever straddle cable and a hook, like this:

Examle of cantilever with straddle cable

but it is not ideal for leverage on the brakes, which may reduce your stopping power. And I'm not suggesting installing the cantilever brake, only using the bridge and straddle cable.

share|improve this answer
    
Of course. I'm a bit dumbfounded I didn't put 2 and 2 together to realize loosening that center cable would suffice. Thanks! –  xonial Oct 22 '11 at 6:29
1  
...and do make sure the cable is not frayed at the point it was bolted up to before. –  ʍǝɥʇɐɯ Oct 23 '11 at 15:51

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.