Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I know there are several clipless that can also be used as platform pedals.

But i'm looking for something that can also have a toeclip.

I'm dreaming with something like those:

enter image description here enter image description here

PLUS this half toe clip:

enter image description here

Even more ideal would be if it wasn't permanently attached so i could carry it with the bike and just clip it there if i'm w/out my bike shoes.

Does anything like this exists? know of any try/success history about someone hacking it together?


Bonus question: if i find a way to attach the half toe clip on the deore XT, maybe 1,5cm more forward than my shoes stay when clipped... would that work? or am i missing any obvious reason it wouldn't?

share|improve this question
2  
Bonus answer: as far as I know, if you have clip you don't need and DON'T WANT an additional toeclip, since it could cause problems on emergency and even regular stops. Also, why the h*ll do you want to use both at the same time? –  heltonbiker Nov 11 '11 at 12:25
    
I may be with heltonbiker on this. Why? Surely possible, but why? –  user313 Nov 12 '11 at 0:16
1  
Ah. I see now. You'd like to be able to hop on without the bike shoes? –  user313 Nov 12 '11 at 0:25
    
@heltonbiker i want both on the same pedal. NOT both at the same time. that's why i would install it a little more forward than my feet rest when cliped. So, case#1: special shoes clipped, straps too open (or removed) and feet not deep enough to hang on toeclip. Case#2: regular shoes, feet deep enough to hang on toeclip, strap pulled. Case#3 special shoes, does not clip, and fully insert foot for a quick go-n-stop. –  gcb Nov 12 '11 at 2:46
    
@gcb : Fine, much clearer now. This is a true DIY idea, and this is good! Just for the record, I ride clipless pedals with regular shoes (no cleats, rubber sole) almost every day. It takes some time to get used, but works very well and is simplest. –  heltonbiker Nov 12 '11 at 13:02
show 2 more comments

6 Answers

up vote 2 down vote accepted

The guy who sponsors my team at the Dick Lane Velodrome converts standard Speedplay Zero pedals to have toe clips. You might be able to contact him to have him make some for you.

speedplay pedal with straps

share|improve this answer
    
Thank you man! I just bought cheap bebop pedals (hint, anyone have a spare cleats for it, i'm buying!) and might try this! exactly what i was looking for! –  gcb Nov 28 '11 at 22:43
    
actually a very clever design... it even have the tab on the back to rotate the pedal like a full sized mountain bike pedal... too bad i got bebops and not speedplays. will email him and see if he can work one with a way to attach to bebops. –  gcb Nov 28 '11 at 22:47
    
Did you have any luck? –  Stephen Touset Dec 3 '11 at 18:25
    
my email is still unanswered... But now i'm searching for a Bebop Cleat, since i'm too cheap to pay $50 on something i don't even know i will like. After i have that, i will work on the adapter as shown above. –  gcb Dec 5 '11 at 21:29
add comment

There are pedals that have a cleat clip on one side and a traditional platform pedal on the other side. You could attach the clip to the platform side and use the cleat side when you're riding with cycling shoes.

You might have problems when you're clipped in because the toe clip might hang too low and catch the road when you're leaning into corners.

enter image description here

share|improve this answer
5  
And please, DON'T mount the toeclip in the clip side unless you want to hurt yourself. –  heltonbiker Nov 11 '11 at 12:22
    
but if the toe clip is on the under side, it will hang on the floor everytime i'm 'cliped' –  gcb Nov 11 '11 at 18:55
2  
As an aside, I have these pedals on my commuter. They are unbelievably heavy. It's like they're made of gold or something. There seems to be more mass there than you would think would be possible for something so small. –  meagar Nov 11 '11 at 19:30
    
note: the site i got the image with the clipless plus toecage under it, was a 'indoor cycle' store. –  gcb Nov 12 '11 at 3:31
1  
Several brands of pedals are sold primarily to the exercise bike market with SPD clips on one side and toe clips on the other. Some brands are really sucky (the SPD clips are virtually unusable), but others fairly decent. –  Daniel R Hicks Nov 12 '11 at 12:43
add comment

A wide variety of pedals exist with toe clips on one side and the "clipless" clip on the other side. Generally more of the full strap variety toe clips, though some may be able to have them swapped out for the style in your picture.

Mostly you'll see this arrangement with the SPD style pedals, though.

One problem you'll experience is that the toe clip will tend to drag on the ground in certain situations.

You also can (or at least could, at one time) purchase adapters that clip into clipless pedals and provide a toe clip mounting. Mostly intended for when you use street shoes. I have a pair of these, though I've never used them much.

share|improve this answer
    
what are those clips called? that would be an ideal solution. i could carry those on bag with the night lights. –  gcb Nov 11 '11 at 21:10
1  
I'll see if I can remember to dig them out and look for a brand name. I've had them for 12-15 years, and never really used them. –  Daniel R Hicks Nov 11 '11 at 21:43
    
Well, though I remembered where those clip-on toe clips were, but when I looked there I couldn't find them. Will have to dig though several other piles.... –  Daniel R Hicks Nov 12 '11 at 14:36
add comment

It is much better to get a pair of your favorite clipless and a pair of your favorite toe-clip pedals and then just swap them out a pedal wrench when needed. It only takes minute and you don't need to torque the pedal too hard.

share|improve this answer
add comment

You used to be able to get Insteps for Look pedals. These were plastic toe-clips with moulded-in cleats, which used standard straps. The "stand height" was a bit higher than using the Look shoes, but they were ideal for short trips. There is a similar product on the market now, but it places your foot about half an inch higher than normal, so is rubbish. for SPDs, I can find nothing.

share|improve this answer
add comment

Think i've found one

http://www.flickr.com/photos/steveparry/2091942712/in/photostream/ vintage shimano 105 pedal

share|improve this answer
1  
That's just a regular toe-clip from "back in the day". It actually uses special shoes that are hard to find, something like these: dromarti.com/… –  Angelo Nov 11 '11 at 19:37
    
So it doesn't really 'clip'? so it's the same as my current setup... cross pedals with toeclips used with trail shoes to lock on the pedal... thanks for the clarification –  gcb Nov 11 '11 at 21:08
3  
Yes, before clipless pedals, we still wore special shoes for cycling. They had a plastic piece on the sole that helped to keep your foot in place, but it was the strap that held your foot to the pedal. This is one of those pedals that worked with those types of shoes. –  Angelo Nov 11 '11 at 22:46
    
@Angelo You had plastic cleats? In my day we had to make cleats by banging granite stones together. :) –  Ward Jun 16 '12 at 5:31
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.