Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have to leave my bike outside at work for 8-10 hours at a time.

If it's -3°C or -6°C, is there anything special I need to do to ensure it will still ride when I'm ready to go home? i.e., will it freeze up?

Also, I can bring it inside at home but I read somewhere that the constant defrosting/refrosting could be worse than just leaving it out in the cold 24/7. Is this true?

share|improve this question
2  
Also of interest: How to prevent my hub body from freezing?, Preventing frozen brake cables, How do I gear up a bike for winter riding?, and also Cycling on snow in extreme freezing conditions: will my bike break? (the first answer in particular has good information about lubricants and freezing temperatures). –  Neil Fein Nov 17 '11 at 20:31
    
I removed the "NYC" from the question, as it this applies to any freezing temperature. Please roll back my edits if I'm off-base. –  Neil Fein Nov 17 '11 at 20:33
add comment

2 Answers 2

up vote 6 down vote accepted

Frequently lubing your components (especially your chain) is crucial in cold weather. Lube (which won't freeze) pushes out water (which does). Besides the protection against freezing, it also will help extend the life of your components even in the face of sand, salt, and gravel debris from cities deicing the roads. Fenders with mud flaps are useful as well, as they will protect your drivetrain from slush. Basically, anything you can do to keep the bike's componentry dry is crucial.

To this end, I would bring the bike inside overnight every day in order to warm it up. This lets water drip off of it, and you can wipe off any that's left with a pile of used rags before you take it on the road each day.

The temperature flux might cause wear on the components, but I suspect the amount pales in comparison to the damage done by freezing (ice expands, putting pressure where it shouldn't go), salt (which corrodes steel), and sand (which prematurely wears components due to grinding).

share|improve this answer
    
Bringing the bike inside would encourage condensation to collect on it (and inside components). Probably better to leave it outside, if it has no ice on it. –  Daniel R Hicks Nov 21 '11 at 0:19
    
Leaving it outside is guaranteeing it getting damp and frozen, IMHO. At least by bringing it inside, you have the opportunity to let it unfreeze and wipe it down. –  Stephen Touset Nov 21 '11 at 19:17
    
Depends on how long, and how humid it is inside. If you bring the bike in for 2-3 hours that's probably worse than leaving it outside. Overnight might be OK, though. –  Daniel R Hicks Nov 22 '11 at 0:31
    
Agree 100%. Clarified my post. –  Stephen Touset Nov 22 '11 at 4:06
add comment

To add to what Stephen said, I would use a wet lube as opposed to a dry lube.

share|improve this answer
    
100% in agreement. –  Stephen Touset Nov 20 '11 at 23:13
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.