Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I've dug an old road bike out of the garage for the winter and need to upgrade the drive-train, I'm happy about most of what I need but but I'm not sure about the rear hub (an old Shimano Ultegra)..

..Will I need to change the rear hub/wheel to accommodate a 10-Speed cassette?

share|improve this question
add comment

2 Answers 2

up vote 9 down vote accepted

Answer: No you don't need a new hub.

However, you will probably need to put a small (~1mm) spacer at the back of the cassette, otherwise you won't be able to tighten the whole cassette down. Also be aware that prolonged use of a 10-speed cassette on an 8/9-speed freehub body will cause dents to form in the freehub body (because the 10-speed cogs are so narrow). The 10-speed freehub bodies have taller splines, so they avoid this problem (but don't work with 8- or 9-speed cassettes).

share|improve this answer
add comment

Assuming the hub is a freehub design (the freewheel mechanism is in a splined body onto which the cassette (sprockets) fit), no. 8, 9 and 10 speed cassettes are all the same width.

See: http://www.sheldonbrown.com/k7.html#10cassettes

share|improve this answer
    
+1 for the link I'll bookmark that. Cheers. –  Dog Ears Sep 5 '10 at 11:10
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.