Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Schwalbe Snow Stud tyres seem like a good winter commuting tyre in places that have only occasional snow/ice conditions. When they are fully inflated they can be used on normal roads and when run on low pressure they should provide good enough grip to cycle in icy conditions.

There is a following note on schwalbe website:

In order to ensure that spikes are permanently fixed, tyres should be run in for about 40km on asphalt, while avoiding any fast acceleration or heavy braking.

My question is: Should this tyre be run on normal or low pressure for that initial 40km use on asphalt?

share|improve this question
3  
Maybe you should ask Schwalbe. –  Daniel R Hicks Dec 14 '11 at 16:46
    
Nokian similarly say: "BREAK-IN ADVICE FOR STUDDED TYRES: Ride approx. 50km (30miles) on road surfaces. Avoid rapid acceleration and hard braking. Careful break-in will reduce stud loosing." –  Hugo Dec 16 '11 at 10:52

1 Answer 1

I just bought these tires for Scottish winter, will chuck them on pretty soon. I think the idea for this 40km is to break the studs-in, to settle them into the tyre. So I would run them on medium pressure: the tyres are not overinflated, but also not on low pressure, sot the studs are engaged, but not 100%.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.