Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I just got these awesome Wald rear folding baskets as an early christmas present from my Girlfriend. The hardware they came with will not fit on my Batavus Fryslan Rack. What would be the best way to mount them?

share|improve this question
1  
Cable ties. The cyclist's duct tape. –  Daniel R Hicks Dec 23 '11 at 12:51
add comment

3 Answers

up vote 1 down vote accepted

After posting this question, I got a twitter response from my local bike shop where I got my Batavus. They suggested screw clamps, and I agreed it was the best choice and mounted my rack with them. Urbanistic tea and bike is awesome!

share|improve this answer
add comment

I would use a combination of baling wire and zip ties. I never rely on zip ties alone in a load bearing application. Zip ties will hold the basket tight and the baling wire will act as a failsafe. Use a load rated zip tie and inspect attachment points regularly. Replace zip ties as they break.

Alternatively you can probably find larger p clamps at your local hardware store that will fit your rack.

share|improve this answer
1  
One hint on zip ties -- use colored ones, preferably black. The pigment slows UV damage significantly vs the white/clear ones. –  Daniel R Hicks Dec 24 '11 at 15:26
add comment

This video really helped me with a milk crate mounting. Using the same concept with nylon string, I would expect you could attach your folding basket, only attaching to the non-moving portion.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.