Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I've been having pain on the sides of my feet (outside about midway back on the foot(. I was wearing a pair of Sidi's size 43. Went to a Specialized 44. Still have the pain, so I'm thinking it's something else, like how I have the cleats bolted on the shoes or even the pedals. How do I diagnose further?

share|improve this question
    
I remember back when I used toe clips (vs clipless pedals) the straps would begin to dig in to the outside of my feet after a long ride. I suspect a similar thing could happen just due to the constricting nature of the shoe. You might try simply not tying you shoes quite so tight, or changing the lacing pattern so they distribute the pressure differently. –  Daniel R Hicks Jan 29 '12 at 2:05
    
road or mtb pedals? –  joelmdev Jan 30 '12 at 6:07
    
Road pedals - Look ARC style –  Keefer Jan 30 '12 at 14:15

3 Answers 3

up vote 2 down vote accepted

Two major possibilities here. Could be a combination of both. I'm tempted to say it's the first one I'm going to talk about:

Given where you said your feet are hurting (outside, front) I'd say you have your cleats toed in too much. This is caused by your foot constantly trying to re-align towards what's neutral for you.
Here's what to do:

What you need to do is take your right shoe, loosen the cleat bolts, and with the sole facing you turn the cleat ever so slightly- just a couple degrees before re-tightening. Take your left shoe and do the opposite; turn the cleat counter-clockwise just a couple of degrees. See if this alleviates the pain at all. Repeat if necessary. You'll know you've gone too far if you start to get pain on the inside front or outside rear of your foot.


The other possibility is that the shoe doesn't fit you quite right.
It may be that the front of your foot is a little wide and you need a wider toe box. Specialized shoes do have pretty wide toe boxes up to their Pro line. The S-Works models get noticeably narrower in the front of the shoe. Despite the fact that you were fitted for a standard width, a wider shoe may be more comfortable. As long as your foot isn't sliding around side to side the shoe isn't too wide. It's important to note that your foot flattens/widens when you press down hard on the pedal so if your shoe is already pretty snug in the front you may need more room. The material that specialized makes their shoes out of (at least the uppers on their S-Works shoes) does not stretch very much, so if it's at all tight now it will probably remain that way.

Don't dismiss the possibility that the shoe may just not fit your foot well from the get-go, regardless of width or size. Cycling shoes are deeply a matter of personal preference, arguably falling right behind saddles. What works great for one person may be a device of torture for another. Keep this in mind and if the above suggestions don't help you, you might want to consider buying some cheaper model used shoes from different brands on ebay before forking over big bucks for a nice pair of shoes that you can't really try before you buy.

share|improve this answer
    
Excellent points. The width of the shoe might be widest at a different part of the last than where you need it for your foot so the shoe might be a "wide" shoe but the way it fits you it might be a narrow fit. –  Chef Flambe Jan 31 '12 at 1:39
    
@Keefer, I'd love to hear back as to whether the suggestions helped or not. –  joelmdev Feb 1 '12 at 18:19

Shoe fit and the stiffness of the last are the first things that come to mind. I'm thinking you have a wide foot and cycling shoes are typically on the narrow side.

I've always had major issues with any shoe that was slightly too narrow for my foot. I'd get cramping along the outside edge of my foot. It gets worse when the shoe becomes stiffer (It's just hell for me to wear X-country ski boots or hockey skates). As cycling shoes are meant to be something akin to a block of wood, that means for me I need to be certain the shoe isn't too narrow or I'll be in pain really quick.

For my road shoes, the size is such that I actually have a slight amount of heel slippage which allows my foot to flex a bit more than what typically would be expected. With my Mtb shoes, I go for the freeride type of shoes which don't give nearly the same amount of energy transfer but my feet are way happier at the end of the day.

I had a pair of Sidi shoes a few years back (Awesome construction) but found that even the Wide width was narrow and caused me pain after a few hours of riding. Specialized seem to fit narrow as well. I've had to try on many a shoe to find a wide enough fit and usually I'm still left with having to go sockless just for a little bit extra comfort.

Get your foot sized by an expert and go from there. If it's a width thing you'll know with numbers. If it's something else then you can start to narrow things down.

share|improve this answer
    
Prior to buying new shoes, had my feet sized at my LBS, and they determined I was a 44 reg and said the Specialized were actually made wider than the Sidis. –  Keefer Jan 30 '12 at 14:49

How is the condition of your pedals and cleats? Maybe they are worn out and they need a replacement. I've had a friend who rode with worn out pedals and he had a lot of damage to his knee.

My cleats also weren't attached the right way at first. Someone who was specialized in body shapes on a bike attached them right on how I put power on my feet and pedals. Maybe you are giving too much power on your feet and your cleats aren't attached the right way either

(sorry for my poor language, I'm not native English)

share|improve this answer
    
Cleats are brand new. Pedals are quite old, but completely functional. I was thinking it was cleat angle or something that needed to be adjusted, but wasn't sure how to make that determination, or which way to adjust. –  Keefer Jan 30 '12 at 15:12
    
That was the word I was looking for! Mine weren't angled the right way! I couldn't give as much power as I can now and sometimes my feet were sort of sleeping (you know, when it tingles). Now they don't do that anymore. –  Hannelore Jan 30 '12 at 15:17
    
I'm thinking this is my problem too. How do I determine which way to rotate the cleats and how much? –  Keefer Jan 30 '12 at 16:31
    
Cleat alignment can also vary from person to person. I'd suggest you wear some sneakers on flats and see what you're naturally inclined to do for angle then try and mimic that with your cleated shoes. Just be careful as if your alignment is out too much then it will translate back to your knee/hip joints and cause even more trouble. Baby steps! Oh, and I'd suggest you get your foot sized at a running shoe store not a bike shop. I've found LBSs know heaps about parts but little about proper sizing. Plus a second opinion is always better than one. –  Chef Flambe Jan 31 '12 at 1:34

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.