Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I take my cassette off the bike to give it a good cleaning a few times a year and have always put a good amount of grease under the lockring. I am not talking about repacking the hubs, bearings or anything like that, just some grease to fill the gap between the lockring and the sealed bearings that are deeper down inside the freehub.

I've seen some references to greasing the threads on the lockring, but nothing about grease under the lockring. Without the grease does dirt/rocks/grass/mud get into that gap?

share|improve this question
add comment

1 Answer 1

up vote 4 down vote accepted

If the bearings are sealed (so dirt can't get into the bearing), and there isn't an interface (two surfaces rubbing together), than lube is probably not needed. Adding lube may actually create a dirt-trap as more dirt sticks rather than just getting in there and falling back out.

The threads, certainly. Packing in behind the lock ring? Not so much.

share|improve this answer
2  
Agreed. Grease is not good to prevent dirt from entering small spaces, but actually just capture dirt and sometimes take it inside, forming a "fluid grinder" –  heltonbiker Jan 30 '12 at 19:45
    
Though a modest amount of grease or heavy oil will aid assembly. –  Daniel R Hicks Jan 30 '12 at 21:34
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.