What are things to improve on a cheap bicycle that make a real difference? I'm looking at the bang for buck tradeoff.
The bike is a Challenge Fixie Track Bike.
- 11 kg steel frame
- Flat bar
- Front and rear V-Brakes
|show 1 more comment|
In a bike that costs, new, only 150GBP, you have to ask where the savings will have been made and the easy first answer is: everywhere.
Obviously these are all worse case scenarios - but given that you could spend the purchase price on just a pair of tyres, a pair of inner tubes and two pairs of brake pads - a bike at this price isn't necessarily the saving you might hope for.
In order to get from A to B, this bike would work, but if A and B are too far apart and you're making that journey fairly frequently, then it might not work for that long.
But to make a real difference, well, send it back and spend a little more up front. In general all new bikes make some concessions to price, but they'll be more than the sum of their parts. The manufacturers pay less than you'd be able to buy the components in the shop, so you'd be better off finding a better bike to start with.
As the old Irish saying goes, "if you want to get there, I wouldn't start from here."
In that order (my opinion, of course):
I think if these are OK, it's possible to live with a relatively cheap bike, provided it fits and don't require too much mainteinance, which are also required for a nice biking experience.
First thing to do is to get the bike completely tuned up -- wheels trued, bearings adjusted, shifters adjusted, brakes adjusted. Changing out the brake pads (the ones supplied are often too hard or too soft) can often improve braking effectiveness. Depending on the bike design, adjusting brake lever position may or may not be possible and may or may not improve riding comfort and brake effectiveness.
And, of course, adjust the seat and handlebar. If the handlebar can't be adjusted upward enough or has the wrong "reach" (probably even more common with expensive bikes) then replacement parts are available to fix this.
Good quality tires, appropriate to your riding style, are a fairly cheap investment.
The right seat (which is something of a personal choice) can make a big difference in comfort.
Your critical factors are comfort, stability, braking effectiveness, and ease of use (eg, shifters that work reliably, etc). Plus basic bike "fit" to your body. Many of the features of fancier bikes -- light weight, exotic materials, bladed spokes, et al -- are vastly overrated and will make little difference in your riding experience.
Nice thing about cheap bikes is that they cost less than the sum of their components, and when you ride them, they get you from a-b just like the expensive bike. The cheapest upgrade is to adjust and grease the bearings properly. While doing this, the bearings with cages can be replaced with loose ball bearings giving more bearing contact points. Adjust the wheels properly for true and spoke tension. I you learn to do this yourself it costs almost nothing, just need a spoke wrench, and a cheap bike is a good one to learn skills on. I put chain adjusters on my fixie's rear axles to help align the wheel while setting the chain tension, there are some very inexpensive ones on the web. Tools needed to work on your own bike are always a good investment.
The cheapest thing to upgrade on a bicycle is the motor. It costs as much as a bit of extra food and time.
Ride a lot. Ride up big hills a lot. Go as fast as you can.
Edited because some dumbass downvoted this most brilliant answer:
None other than Eddy Mercx, (who won the Tour de France 5 times and once cycled 49.431 km in an hour), once said:
Don't buy upgrades, ride up grades.