Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

21 speed commuter bike. Raleigh 2011 brand.

After my gear shifter cable was broken, I took it into the shop to get it fixed. (4 days ago). Ever since, when shifting, it takes forever to actually shift and often does quite 'violently'. Shifting way past the trouble gears (past where I can currently handle) or way lower solves the problem. But that's not a good solution obviously.

Is there anything that I can do to fix this problem? What did they mess up at the bike store?

share|improve this question
add comment

1 Answer 1

up vote 3 down vote accepted

The cable needs adjusting. A new cable will tend to stretch and go out of adjustment, so they should provide a free adjustment after replacing it.

share|improve this answer
1  
Taking to the shop to make a post-service is the way to do, specially because you payed for it. Probably you could do it yourself, but that would not be fair :o) –  heltonbiker Feb 26 '12 at 23:45
2  
Though adjusting shift cables is something that one should learn to do. At the shop, ask the tech to let you watch, and ask him to explain what he's doing. –  Daniel R Hicks Feb 27 '12 at 0:31
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.