Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I bought this SRAM PC1091 chain for my compact chainset and have been running it since January. In order for the chain to fit properly I cut a few links from it. I am now getting a standard chainset, so I think I will have to add some links back on the chain.

Can I reattach this link to my chain to make it longer? This is how I left it when I chopped it.

enter image description here

share|improve this question

1 Answer 1

up vote 2 down vote accepted

Yes, you can, but it leaves the chain weaker on that link.

The SRAM chains are designed to work with a master link. If you use that one, it's not reusable, but it comes in a pack of 4, so you can open and close it a few times for cleaning.

share|improve this answer
    
Thanks. As I'll have to disconnect the chain's power lock anyway I'll end up with two power locks on it I think. –  Robin Apr 11 '12 at 19:26
    
You can definitely get away with re-using powerlinks a few times on SRAM chains. I havn't really had any issues. I use a Park MLP-1 to remove them and snap them back on by hand. Really, breaking the chain with a chain tool every time is a waste. –  Benzo Apr 13 '12 at 20:21
    
@Benzo: You can do it, physically, yes. But it weakens the link, and it will separate at some point. They are designed not to be reused. –  zenbike Apr 14 '12 at 6:55

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.