Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

The Scott Foil Premium is the highest end frame available from Scott Sports, and it is designed to run an electronic drive train, routed internally.

The original reports were that this frame would be available to run either a mechanical or electronic drive train, but that information appears to no longer be available.

I would like to run mechanical Campagnolo Super Record on this frame. The question is, does the frame have the necessary cable routing and cable stops for a mechanical drivetrain, or is it electronic only.

I am interested in the Foil Premium, in part because of the graphic design, but I don't want to order the frame, and then find out I can't run the drive train I want. I could play safe and order the Team Issue, but I don't like the color as well, and I may want to run electronic at some future date, so I like the flexibility of the Foil Premium, if it works.

Scott Foil Premium

It will likely take a physical examination of the frame to answer this question accurately.

Scott Foil Team Issue

This is the Scott Foil Team Issue, which is designed for mechanical shifting, for sure.

share|improve this question
1  
Seems like Scott Sports would gladly tell you? Especially for a new high end frame. –  user313 Apr 28 '12 at 1:52
    
I've asked. I was told they needed to check, 2weeks ago. I've had no further response since. –  zenbike Apr 28 '12 at 2:09
1  
There is always the possibility to use one single piece of cable router from shifter to derailer (no cable stops needed). Perhaps if it is done carefully, the end result is visually compatible with the whole high-end design. –  heltonbiker Apr 28 '12 at 13:28
    
The bottom bracket on the Foil for the mechanical shifter has a 2cm x 2.5cm cutout for the BB cable guide. It also has a hole drilled in the top of the drive side chain stay, right behind the seat tube. I need to determine if the Di2 version also has these holes. –  zenbike Apr 28 '12 at 15:12
1  
Voted to close. This is entirely a self motivated question. It has no relevance other than that the poster just wants to say,"look at my new bike". –  user313 May 3 '12 at 7:41
show 5 more comments

1 Answer

up vote 1 down vote accepted

The Foil Premium frame does not have the factory routing for mechanical shifting. It is designed for Shimano Di2 or Campagnolo EPS electronic shifting only.

I was able to modify the frame successfully to accept normal cable routing, but I wouldn't recommend it unless you are very confident in your skills with drill and dremel. And of course it voids the warranty.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.