Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

Some possibilities, which I haven't tried:

  • try to bend it back into shape with my hands while still mounted
  • take off the rotor, sandwich it between a couple of wooden blocks, put some weight on it and leave it for a night
share|improve this question
    
For emergency or "in a hurry" situations, inserting an allen key or screwdriver through one of the the cooling holes in the disk and GENTLY applying some force is a nice trick. –  heltonbiker Apr 29 '12 at 0:47
    
solution 2 doesn't work for minor bends because rotors are very elastic. –  bigstones May 26 '12 at 10:32

1 Answer 1

Try a Park DT-2 rotor tool or something similar.I've used a large adjustable wrench with mixed results.Usually the larger the clearance between the pads and rotor the more forgiveing it will be to the rotor being a little off.I leave the wheel mounted,spin it to find the high spot .Then tighten the wrench on to the rotor and flex gently to straighten the rotor.

share|improve this answer
    
Cheers, just ordered one of these. –  BBDave Apr 29 '12 at 0:30
    
Also, If you had a park tool TS-2 truing stand, you could get a park tool DT-3 Rotor Truing Gauge to help measure how true your rotor is. –  Benzo Apr 30 '12 at 20:12

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.